SBP662
A ball mounter for wafers that prints flux and places solder balls all at once after vision alignment of the wafer. Its metal cup method handles micro balls down to Min. φ0.05mm.
Maker: Shibuya Corporation · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to Shibuya Corporation. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Applicable products | Wafer bumping, wafer-level CSP, electronic components |
|---|---|
| Ball size | Min. φ0.05 to 0.3mm |
| Supported wafers | φ8 and φ12 inch (φ4 to 6 inch available as an option) |
| Capacity | φ12 inch: 42WPH (with 1 million φ0.06mm balls) |
| Alignment accuracy | ±0.01mm |
Specifications as published by the maker. See the sources below.
Overview
The SBP662 is Shibuya Corporation's solder ball mounter for wafers. After high-precision vision alignment of the wafer, it prints flux and places solder balls all at once. A metal cup method developed for micro balls lets it handle balls down to Min. φ0.05mm.
In the metal cup method, balls are supplied onto the ball mask and surplus balls on the mask are collected. There is ample clearance between the metal cup and the ball mask, so balls and substrates are not damaged during placement. The company says the non-contact design removes sources of contamination and, together with the ball collection function, greatly reduces the amount of balls discarded.
Applicable products are wafer bumping, wafer-level CSP and electronic components. Ball size is Min. φ0.05 to 0.3mm, and wafer size is φ8 and φ12 inch (φ4 to 6 inch available as an option). Capacity is 42WPH for φ12 inch (with 1 million φ0.06mm balls), and alignment accuracy is ±0.01mm.
Key features
- Metal cup method developed for micro ball placement
- Less ball waste with a ball collection function
- Stable ball placement with vision alignment and wafer thickness detection
- Wafer stages and warpage correction plates for each size shorten changeover
Applications
- Wafer bumping
- Ball placement for wafer-level CSP
FAQ
What is the capacity of the SBP662?
According to the official specifications, it is 42WPH for φ12 inch (with 1 million φ0.06mm balls).
Terms explained
Other ball mounters and bumping equipment
- SBM371 · Shibuya Corporation
- SBM381 · Shibuya Corporation
- SBP551 · Shibuya Corporation
- SBB-5200 · Shinkawa (Yamaha Robotics)
All ball mounters and bumping equipment and Japanese suppliers
More from Shibuya Corporation
Sources
Ball mounters and bumping equipment
Last updated: November 13, 2026