Semiconductor Knowledge: Glossary, Comparisons and Calculators
Semiconductor terms, technology comparisons and calculators in one place: a glossary of chipmaking processes, equipment, materials and devices grouped by topic, side-by-side articles such as EUV vs DUV and SiC vs GaN, and engineering calculators.
Glossary by topic
Each term page has a short definition, a diagram, how it is used in practice and the sources it is based on. Topics follow the chipmaking flow from wafers and lithography to packaging and test.
- Fundamentals (50 terms)The physics and basic process concepts that the rest of the glossary builds on: what makes silicon a semiconductor, how a transistor switches, and how a wafer becomes a chip.
- Wafers and substrates (37 terms)How single-crystal silicon is grown, sliced, polished and checked before any chip is built on it, and the compound and engineered substrates used next to plain silicon.
- Lithography (39 terms)The steps that print circuit patterns onto the wafer: photomasks, photoresist, exposure tools from i-line to EUV, and the multi-patterning and overlay techniques that push resolution further.
- Etching (27 terms)How material is removed to turn a resist pattern into transistor gates, contacts and deep holes: plasma etching, wet etching, selectivity, aspect ratio and the newer atomic layer etch.
- Deposition (30 terms)How thin films of insulators, metals and semiconductors are grown on the wafer: chemical vapour deposition, atomic layer deposition, sputtering, epitaxy and plating.
- Ion implantation and thermal processing (20 terms)How dopants are placed in silicon and activated: ion implantation, annealing, oxidation and the furnaces and rapid thermal tools that control the thermal budget.
- CMP and cleaning (31 terms)How wafers are kept flat and clean between process steps: chemical mechanical planarization, slurries and pads, and the wet and dry cleaning steps that remove particles and residues.
- Inspection and metrology (31 terms)How fabs find defects and measure what they have built: optical and e-beam inspection, CD-SEM, overlay, film thickness and the analysis methods used to trace yield loss.
- Test and reliability (43 terms)How chips are tested before and after packaging and how their lifetime is verified: wafer probing, ATE, burn-in, failure analysis and the reliability tests and models behind them.
- Packaging (57 terms)How dies are cut, connected and protected, and how advanced packaging joins several chips into one: dicing, wire and flip-chip bonding, substrates, 2.5D/3D integration and hybrid bonding.
- Materials (37 terms)The chemicals, gases, films and substrates consumed in chipmaking: photoresists, specialty gases, high-purity chemicals, sputtering targets, packaging materials and the purity standards they must meet.
- Fab infrastructure and equipment parts (63 terms)Everything around the process tools: cleanrooms, ultrapure water, gas and chemical supply, vacuum pumps, RF power, robots and automated material handling, and the parts that wear out inside the tools.
- Memory (16 terms)How memory chips store data and how they are made: DRAM, NAND flash, HBM, emerging memories, and the reliability concepts such as endurance and retention that limit them.
- Power semiconductors (22 terms)Devices that switch and convert electrical power, from silicon MOSFETs and IGBTs to SiC and GaN, and the module, packaging and reliability issues that come with high voltage and heat.
- Devices and process nodes (36 terms)How transistors and chips are structured and how they keep improving: process nodes, FinFET and gate-all-around, interconnects, chiplets and the design concepts that connect them.
- Industry and supply chain (12 terms)How the chip industry is organised: foundry and fabless models, OSATs, equipment and materials supply chains, and the export controls and subsidies that now shape them.
Technology comparisons
Each comparison starts with a short answer, then a side-by-side table and the glossary terms behind it.
Czochralski vs float zone · SOI vs bulk silicon · Epitaxial wafer vs polished wafer
EUV vs DUV lithography · High-NA EUV vs standard EUV · Single patterning vs multi-patterning · Chemically amplified resist vs metal oxide resist
CoWoS vs SoIC · CoWoS vs InFO · Chiplet vs monolithic · Hybrid bonding vs flip chip · TSV vs wire bond
SiC vs GaN · SiC vs silicon · Gallium oxide vs SiC · SiC MOSFET vs IGBT
Calculators
Engineering calculators for yield, cost, device physics and process conditions, each with the formula it uses.
- Yield, quality and reliability (8 calculators)
- Fab economics and operations (6 calculators)
- Device physics and crystals (14 calculators)
- Power devices and thermal design (6 calculators)
- Plasma, vacuum, films and facilities (24 calculators)
- Circuit design and memory (7 calculators)
Events
Last updated: November 13, 2026