471-TT Version LA
TESEC's fully automatic test system for wafer testing (CP process) of SiC and GaN power semiconductors. It runs DC static tests and L-load (UIS/avalanche) tests in one contact.
Maker: TESEC · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to TESEC. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Target devices | SiC MOSFET, GaN, Si MOSFET, IGBT, diodes |
|---|---|
| Test items | DC: Vdss, Idss, Vgs(th), Rdson, Vfsd, etc. / UIS: avalanche energy |
| Voltage and current | 2 kV, 200 A (DC) / 50 to 100 A (UIS) |
| Parallel testing | 4 devices at DC 2 kV/20 A; 1 device for UIS and DC at 21 A or more |
| Protection | Cuts off the test circuit within 500 ns on device breakdown |
| Wafer | 200 mm, 300 mm |
| Compatible probers | ACCRETECH UF2000/AP3000 + DARUMA Chuck (direct docking) |
Specifications as published by the maker. See the sources below.
Overview
The 471-TT Version LA is TESEC's fully automatic wafer-level (CP process) test system for SiC and GaN power semiconductors. It runs DC static measurements and UIS (avalanche energy) tests with an L load back to back in one contact.
At DC 2 kV/20 A, it can test up to 4 chips at the same time. If a device breaks down during UIS or L-load testing, it cuts off the test circuit within 500 ns for protection. Voltage is 2 kV, and current is 200 A for DC and 50 to 100 A for UIS.
To suppress discharge and contact resistance at high voltage and high current, the test setup uses WTS, the DARUMA chuck stage and a pressure card function. It supports 200 mm and 300 mm wafers and docks directly to ACCRETECH's UF2000/AP3000.
Key features
- DC static and UIS tests in one contact
- Up to 4 chips tested at once at DC 2 kV/20 A
- Cuts off the test circuit within 500 ns on breakdown
- Supports 200 mm and 300 mm wafers
Applications
- Wafer testing of automotive and industrial SiC MOSFETs
- Wafer testing of GaN FETs, IGBTs and diodes
Terms explained
Other power device test systems
More from TESEC
Sources
Last updated: November 13, 2026