EG-303 series
A 300 mm wafer aligner from Daihen. It is an edge-grip type that does not touch the wafer backside, and it also handles quartz wafers. It has a high-precision mode and a normal mode.
Maker: Daihen · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to Daihen. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Type | Edge grip (no contact with wafer backside) |
|---|---|
| Supported wafers | 300 mm (quartz wafers also supported) |
| Repeatability | High-precision mode XY ±0.05 mm, θ ±0.075° / normal mode XY ±0.2 mm, θ ±0.1° |
| Alignment time | High-precision mode 7.5 s average / normal mode 3.5 s average |
| Cleanliness | ISO Class 3 (ISO-14644) |
Specifications as published by the maker. See the sources below.
Overview
The EG-303 series is a wafer aligner from Daihen for 300 mm wafers. It is an edge-grip type that does not touch the wafer backside, and it can also handle quartz wafers.
It has 2 operating modes: high-precision and normal. In high-precision mode, repeatability is XY ±0.05 mm and θ ±0.075° with an average alignment time of 7.5 seconds. In normal mode it is XY ±0.2 mm and θ ±0.1° with an average of 3.5 seconds.
Cleanliness is ISO Class 3 (ISO-14644), the unit weighs 7 kg, and the power supply is 24 VDC 3 A. The specified installation environment is 0 to 40 °C and 70% humidity or less (no condensation).
Key features
- Edge-grip method with no contact on the wafer backside
- Also handles quartz wafers
- Switching between high-precision and normal modes
- Unit weight of 7 kg
Applications
- Alignment of 300 mm wafers
- Alignment of quartz wafers and wafers whose backside should not be touched
FAQ
What is the difference between high-precision mode and normal mode?
High-precision mode gives repeatability of XY ±0.05 mm and θ ±0.075° with an average of 7.5 seconds. Normal mode gives XY ±0.2 mm and θ ±0.1° with an average of 3.5 seconds. Users choose based on whether accuracy or time matters more.
Other wafer aligners (notch and flat)
- OFH-4100 series · Daihen
- 300mm Edge Grip Aligner · Hirata Corporation
- SAL3484HV · JEL Corporation
- SVAL3001 · JEL Corporation
- RA320-C22-L · RORZE
- RA420-6CV-L · RORZE
- MAF-R series · Tazmo
- MAF-S series · Tazmo
More from Daihen
- ACTRANS UT-VSW3000NS series · Wafer transfer robots and EFEMs
- RF generators and auto matching units (RGA/WGA/MGA/FGA series) · RF generators and plasma power supplies
- UTW-REH5500 · Wafer transfer robots and EFEMs
Sources
Wafer aligners (notch and flat)
Last updated: November 13, 2026