Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Equipment components and wafer handling

Wafer aligners (notch and flat)5 Japanese makers

Wafer aligners detect the notch or orientation flat on a wafer's edge and rotate the wafer to a set angle relative to its crystal orientation. Process tools expect wafers to arrive centered and in a known orientation, and steps such as exposure and dicing depend on it, so wafers are aligned before they are handed to the tool.

9 products listed · 3 related categories
Get quotes (6 companies)Inquire (6 companies)

Tick "Add to bulk request" on the cards to send your request only to the companies and products you choose.

  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
How it works
  1. Fill in one form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to the 6 companies in this category. Your details are shared with them only with your consent.
  3. The companies replyEach company usually replies within 2–3 business days.

AdBanner space for Wafer aligners (notch and flat) is available (one company per category).About advertising →

Daihen

EG-303 series

A 300 mm wafer aligner from Daihen. It is an edge-grip type that does not touch the wafer backside, and it also handles quartz wafers. It has a high-precision mode and a normal mode.

TypeEdge grip (no contact with wafer backside)
Supported wafers300 mm (quartz wafers also supported)
RepeatabilityHigh-precision mode XY ±0.05 mm, θ ±0.075° / normal mode XY ±0.2 mm, θ ±0.1°
Alignment timeHigh-precision mode 7.5 s average / normal mode 3.5 s average
CleanlinessISO Class 3 (ISO-14644)
Daihen

OFH-4100 series

A wafer aligner from Daihen for 50 to 300 mm wafers. It aligns at high speed, with an alignment time of 1.8 seconds. There are 4 models by wafer size, and quartz wafers are also supported.

SeriesOFH-4100 (200-300 mm) / OFH-4101 (150-200 mm) / OFH-4102 (100-200 mm) / OFH-4103 (50-150 mm)
Repeatability±0.1 mm in each of X and Y, ±0.2° in θ
Alignment time1.8 s (2.5 s for 50 mm wafers)
CleanlinessISO Class 3 (ISO-14644)
Hirata Corporation

300mm Edge Grip Aligner

Hirata Corporation's aligner for 300 mm wafers. Its edge grip method does not touch the wafer backside, which limits particle contamination, and a high-resolution absolute AC servo motor provides fast, precise alignment.

Supported wafers300 mm
TypeEdge grip method
DriveHigh-resolution absolute AC servo motor
OtherWafer grip sensor, ESD protection (conductive materials, conductive surface treatment)
JEL Corporation

SAL3484HV

JEL's multi-work aligner for 100–200 mm wafers. Its in-house image sensor centers silicon, transparent, and semi-transparent wafers regardless of material and locates the orientation flat or notch.

TargetSEMI-standard wafers (transparent, semi-transparent, silicon) 100–200 mm
Positioning timeCentering 3 sec
Positioning accuracyCentering within ±0.1 mm, orientation flat/notch within ±0.1 degrees
SensorImage sensor unit with LED lighting
CleanlinessISO Class 2 (with drive exhaust)
JEL Corporation

SVAL3001

JEL's vacuum aligner. It positions silicon wafers and various susceptors in a vacuum using a grip method, with the positioning sensor also placed inside the vacuum. Its vacuum rating is 1.33×10⁻⁶ Pa.

TargetSEMI-standard silicon wafers 100–300 mm, various susceptors
Positioning timeNotch search within 4 seconds (no re-gripping motion)
Positioning accuracyCentering within ±0.3 mm, notch within ±0.3 degrees
Vacuum rating1.33×10⁻⁶ Pa
Payload4 kg
RORZE

RA320-C22-L

RORZE's compact, lightweight aligner with a θ axis plus Z and X axes for position correction. A non-contact optical sensor aligns silicon, glass and bonded wafers.

Wafer size300 mm diameter
Notch angle accuracy±0.05–±0.2°
Center accuracy±0.1 mm
Positioning time5–7 s (depends on alignment mode)
CommunicationTCP/IP (RS232C optional)
RORZE

RA420-6CV-L

RORZE's high-accuracy aligner. It has X and Y axes on the θ axis plus a Z-axis mechanism for position correction, and handles wafers from 150 to 300 mm in diameter, including transparent glass and bonded wafers.

Configurationθ axis + X and Y axes, Z-axis mechanism for wafer position correction
Supported wafers150–300 mm diameter
Notch angle accuracy / center accuracy±0.05–±0.1° / ±0.05–±0.1 mm (depends on alignment mode)
Positioning time2.5–6.5 sec (depends on alignment mode)
Tazmo

MAF-R series

A backside vacuum-chuck pre-aligner that performs orientation flat alignment and centering of a wafer without re-gripping it. The series has 4 models for different wafer sizes, and its CCD line sensor also supports transparent glass and compound semiconductors.

TypeBackside vacuum chuck (pre-aligner)
SeriesMAF-RAPN (φ200–φ300 mm) / MAF-RBPN (φ100–φ200 mm) / MAF-RCPN (φ150–φ300 mm) / MAF-RPZZ (φ50.8–φ100 mm)
Processing time4.5 s or less (MAF-RAPN and MAF-RCPN, φ300 mm)
Processing accuracy (3σ)XY ±0.1 mm, θ ±0.1° (MAF-RPZZ: XY ±0.2 mm, θ ±0.2°)
Tazmo

MAF-S series

An edge-hold (mechanical clamp) pre-aligner that touches only the wafer edge. With no backside contact it limits particle contamination, and Tazmo says it can also handle compound semiconductors and glass (consultation required).

TypeEdge hold (mechanical clamp)
SeriesMAF-SHKZ (φ300 mm) / MAF-SJKZ (φ200 mm) / MAF-SKKZ (φ150 mm)
Processing timeWithout re-gripping: 8.0 s or less (MAF-SHKZ), 8.5 s or less (MAF-SJKZ and MAF-SKKZ) / with re-gripping: 20.0 s or less
Processing accuracyθ: within ±0.2° (3σ)

* Specifications are reference values based on public information. Please confirm exact specifications with the maker.

Other equipment components and wafer handling


Sources


  1. Daihen: EG-303 series product page
  2. Daihen: OFH-4100 series product page
  3. Hirata Corporation: 300mm Edge Grip Aligner product page
  4. JEL: SAL3484HV product page
  5. JEL: SVAL3001 (vacuum aligner) product page
  6. RORZE: RA320-C22-L product page
  7. RORZE: RA420-6CV-L product page
  8. RORZE: RA420-48V-L product page
  9. Tazmo: MAF-R series product page
  10. Tazmo: MAF-S series product page

More on this topic


Japanese equipment by category

Wafer aligners (notch and flat)

Last updated: November 13, 2026