Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Wafer aligners (notch and flat)

MAF-S series

An edge-hold (mechanical clamp) pre-aligner that touches only the wafer edge. With no backside contact it limits particle contamination, and Tazmo says it can also handle compound semiconductors and glass (consultation required).

Maker: Tazmo · Official product page

Tazmo
  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
Official product page ↗
How it works
  1. Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to Tazmo. Your details are shared with the maker only with your consent.
  3. The maker repliesReplies usually arrive within 2–3 business days.

Can't find a product, or unsure which to choose?

Free consultation

Specifications


TypeEdge hold (mechanical clamp)
SeriesMAF-SHKZ (φ300 mm) / MAF-SJKZ (φ200 mm) / MAF-SKKZ (φ150 mm)
Processing timeWithout re-gripping: 8.0 s or less (MAF-SHKZ), 8.5 s or less (MAF-SJKZ and MAF-SKKZ) / with re-gripping: 20.0 s or less
Processing accuracyθ: within ±0.2° (3σ)

Specifications as published by the maker. See the sources below.

Overview


The MAF-S series is an edge-hold pre-aligner in Tazmo's clean transfer systems. It uses a mechanical clamp that touches only the wafer edge, and Tazmo says aligning without touching the backside keeps particle contamination to a minimum.

The lineup has 3 models: MAF-SHKZ for φ300 mm, MAF-SJKZ for φ200 mm and MAF-SKKZ for φ150 mm. Without re-gripping, processing time is 8.0 s or less for MAF-SHKZ and 8.5 s or less for MAF-SJKZ and MAF-SKKZ. With re-gripping, it is 20.0 s or less for every model. Processing accuracy is within θ ±0.2° (3σ), and the processable range is a wafer center offset within ±1 mm.

It supports SEMI/JEIDA-standard wafers, and Tazmo says it can also handle compound semiconductors and glass (consultation required). A photomicrosensor confirms that the wafer is held.

Key features


  • Clean alignment that touches only the wafer edge
  • Automatically identifies notch or orientation flat type, so no setting on the host controller is needed
  • Compact design with a built-in controller
  • RS-232C serial communication

Applications


  • Notch or orientation flat alignment of wafers without touching the backside
  • Alignment of compound semiconductor and glass wafers (consultation required)

FAQ


What utilities does the MAF-S series need?

According to the official specifications, the power supply is DC24V ±10% (3A for MAF-SHKZ and MAF-SJKZ, 5A for MAF-SKKZ), and dry air is one line at φ6 mm, 0.35 MPa to 0.4 MPa. The unit weighs about 8 kg.

Other wafer aligners (notch and flat)


All wafer aligners (notch and flat) and Japanese suppliers

More from Tazmo


Sources


  1. Tazmo: MAF-S series product page

More on this topic


Last updated: November 13, 2026