Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Wire saws and wafer slicing equipment

MWM3050nQ

A multi-wire saw from Komatsu NTC for 12-inch wafers. It uses the slurry method, is described as having a track record in the semiconductor substrate industry, and aims for stable cut shapes with a rigid design and thermal control mechanism.

Maker: Komatsu NTC · Official product page

Komatsu NTC
  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
Official product page ↗
How it works
  1. Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to Komatsu NTC. Your details are shared with the maker only with your consent.
  3. The maker repliesReplies usually arrive within 2–3 business days.

Can't find a product, or unsure which to choose?

Free consultation

Specifications


TypeSlurry
Maximum workpiece sizeΦ300 × L450 mm × 1 ingot
Maximum wire speed1000 m/min
Tension range15–34 N
Wire capacityΦ0.14 mm × 500 km

Specifications as published by the maker. See the sources below.

Overview


MWM3050nQ is a wire saw from Komatsu NTC for 12-inch wafers. It is described as a model with a track record in the semiconductor substrate industry, which demands the highest quality. It uses the slurry method, and the maximum workpiece size is Φ300 × L450 mm (1 ingot).

FEM analysis was used to raise machine rigidity, limiting deformation under processing loads for stable cutting. The company says linear guides that withstand high loads eliminate fine waviness and achieve high straightness. The spindle unit and main rollers have temperature sensors and cooling mechanisms, so spindle temperature during cutting can be controlled as desired to limit thermal deformation.

Key features


  • High-rigidity design based on FEM analysis
  • High straightness from linear guides rated for high loads
  • Thermal control mechanisms for the spindle unit and main rollers
  • Wire travel can be one-directional, reciprocating or switched

Applications


  • Slicing of 12-inch (300 mm) semiconductor substrates

FAQ


What is the range of cutting feed speed?

According to the official specifications, it is 0.01–2.50 mm/min. The maximum wire speed is 1000 m/min, and the NC is from FANUC.

Terms explained


Wire Saw · Kerf Loss · Orientation Flat / Notch · Laser Slicing / Laser Lift-off

Other wire saws and wafer slicing equipment


All wire saws and wafer slicing equipment and Japanese suppliers

More from Komatsu NTC


  • GCG300 · Wafer polishing and edge grinding equipment

Sources


  1. Komatsu: MWM3050nQ product page (English)

More on this topic


Last updated: November 13, 2026