DR3000IV
Nitto Denko's fully automatic protective tape laminator for 300 mm wafers. It applies backgrinding protective tape to the wafer pattern side.
Maker: Nitto Denko · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to Nitto Denko. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Type | Fully automatic protective tape laminator (NEL SYSTEM™ series) |
|---|---|
| Supported wafers | 300 mm / 200 mm (wafer thickness 400 µm or more) |
| Capacity | Up to 88 wafers/hr |
| Compliance | CE marking / SEMI S2/S8 |
Specifications as published by the maker. See the sources below.
Overview
DR3000IV is a backgrinding protective tape laminator in Nitto Denko's NEL SYSTEM™ series. It is a fully automatic type for 300 mm wafers that applies backgrinding protective tape to the wafer pattern side.
It supports FOUPs and open cassettes, with low-tension lamination, lamination pressure control and tape sag detection. It is operated from a touch panel, where recipes for operating conditions can be set and selected.
Applicable wafer sizes are 300 mm / 200 mm, the applicable wafer thickness is 400 µm or more and capacity is up to 88 wafers/hr (depending on workpiece, tape and other conditions).
Key features
- Supports FOUPs and open cassettes
- Low-tension lamination and lamination pressure control
- Tape sag detection and operation monitoring as standard
- Optional wafer mapping scanner and SECS/GEM, CE marking / SEMI S2/S8 compliant
Applications
- Applying protective tape to the wafer pattern side before backgrinding
FAQ
What is the capacity of DR3000IV?
According to the official basic specifications, it is up to 88 wafers/hr. Applicable wafer sizes are 300 mm / 200 mm and the applicable wafer thickness is 400 µm or more.
Other wafer mounters
- DFM2800 · DISCO
- DMM9200 · DISCO
- Adwill RAD-2510F/12Sa · LINTEC
- Adwill RAD-2512F/12 · LINTEC
- Adwill RAD-3520F/12 · LINTEC
- Adwill RAD-3600F/12 · LINTEC
- HR3000III · Nitto Denko
- MA3000Ⅲ · Nitto Denko
More from Nitto Denko
- ELEP HOLDER (dicing tapes) · Dicing and backgrinding tapes
- ELEP MOUNT (EM series) · Die bonding materials
- MR3000Ⅲ · Wafer mounters
- MV3000 · Wafer mounters
Sources
Last updated: November 13, 2026