HR3000III
Nitto Denko's fully automatic protective tape remover for 300 mm wafers. It peels backgrinding protective tape from the wafer pattern side.
Maker: Nitto Denko · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to Nitto Denko. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Type | Fully automatic protective tape remover (NEL SYSTEM™ series) |
|---|---|
| Supported wafers | 300 mm / 200 mm (wafer thickness 100 µm or more) |
| Capacity | Up to 65 wafers/hr |
| Compliance | CE marking / SEMI S2/S8 |
Specifications as published by the maker. See the sources below.
Overview
HR3000III is a backgrinding protective tape remover in Nitto Denko's NEL SYSTEM™ series. It is a fully automatic type for 300 mm wafers that peels backgrinding protective tape from the wafer pattern side.
It is known for reliable peeling using a peel trigger and low-stress peeling through precise control of the peel bar. It supports FOUPs and open cassettes, and recipes for operating conditions can be set and selected on a touch panel.
Applicable wafer sizes are 300 mm / 200 mm, the applicable wafer thickness is 100 µm or more and capacity is up to 65 wafers/hr (depending on workpiece, tape and other conditions).
Key features
- Reliable peeling with a peel trigger
- Low-stress peeling through precise control of the peel bar
- Supports FOUPs and open cassettes, operation monitoring as standard
- Optional wafer mapping scanner and SECS/GEM, CE marking / SEMI S2/S8 compliant
Applications
- Peeling protective tape from the wafer pattern side after backgrinding
FAQ
What wafer thickness can HR3000III handle?
According to the official basic specifications, the applicable wafer thickness is 100 µm or more. For TAIKO wafers, HR9300 (300 mm) is available in the same series.
Other wafer mounters
- DFM2800 · DISCO
- DMM9200 · DISCO
- Adwill RAD-2510F/12Sa · LINTEC
- Adwill RAD-2512F/12 · LINTEC
- Adwill RAD-3520F/12 · LINTEC
- Adwill RAD-3600F/12 · LINTEC
- DR3000IV · Nitto Denko
- MA3000Ⅲ · Nitto Denko
More from Nitto Denko
- ELEP HOLDER (dicing tapes) · Dicing and backgrinding tapes
- ELEP MOUNT (EM series) · Die bonding materials
- MR3000Ⅲ · Wafer mounters
- MV3000 · Wafer mounters
Sources
Last updated: November 13, 2026