Adwill RAD-2510F/12Sa
A 300mm fully automatic multi wafer mounter that performs UV irradiation of wafers after backgrinding, alignment, mounting to a dicing frame and removal of BG surface protection tape, all in one tool.
Maker: LINTEC · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to LINTEC. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Type | 300mm fully automatic multi wafer mounter (standalone/inline) |
|---|---|
| Dimensions | 2,165mm (W)×3,090mm (D)×1,800mm (H) (excluding protrusions and signal tower) |
| Supported tapes | D series (UV-curable) and G series (non-UV) dicing tapes |
| Related models | Can be connected inline with DISCO's DFG8000 series and DGP8000 series (optional) |
Specifications as published by the maker. See the sources below.
Overview
RAD-2510F/12Sa is a 300mm fully automatic multi wafer mounter in LINTEC's Adwill brand. It is described as a standalone mounter suited to ultra-thin wafer production, and it performs UV irradiation of wafers after the backgrinding process, alignment, mounting to a dicing frame and removal of BG surface protection tape, all in one tool.
LINTEC says it reduces handling of the bare wafer to 4 times in standalone use and 2 times when inline with a backgrinder, which limits damage to the wafer. Throughput is about 60% higher than the previous model (compared on 300mm bare wafers), and the tool is about 30% smaller than the previous model.
Options include an inline pre-cut mechanism that cuts rolled dicing tape inside the tool, support for the dicing before grinding process, and inline connection with DISCO's DFG8000 series grinders or DGP8000 series grinder/polishers. BG surface protection tape can be removed by either heat seal or adhesive tape (optional).
Key features
- Handles everything from UV irradiation to mounting and BG surface protection tape removal in one tool
- Bare wafer handling reduced to 4 times in standalone use and 2 times inline
- About 60% higher throughput than the previous model (compared on 300mm bare wafers) and about 30% smaller size
- Support for the dicing before grinding process and inline connection with DISCO grinders (both optional)
Applications
- Mounting of ultra-thin wafers to dicing frames
- Removal of BG surface protection tape after backgrinding
- Dicing before grinding process (optional)
FAQ
Can RAD-2510F/12Sa be connected inline with a grinder?
The official page says it can be connected inline, as an option, with DISCO's DFG8000 series grinders or DGP8000 series grinder/polishers.
Other wafer mounters
- DFM2800 · DISCO
- DMM9200 · DISCO
- Adwill RAD-2512F/12 · LINTEC
- Adwill RAD-3520F/12 · LINTEC
- Adwill RAD-3600F/12 · LINTEC
- DR3000IV · Nitto Denko
- HR3000III · Nitto Denko
- MA3000Ⅲ · Nitto Denko
More from LINTEC
- Adwill (dicing tapes and BG tapes) · Dicing and backgrinding tapes
- Adwill LE tape · Die bonding materials
- Adwill RAD-3010F/12 · Backgrinders
Sources
Last updated: November 13, 2026