XTRAIA MF-2000
Rigaku's XRR, EDXRF and XRD metrology tool for wafers up to 200 mm. It measures the thickness, composition, density and roughness of unpatterned and patterned thin films.
Maker: Rigaku · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to Rigaku. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Type | X-ray reflectometry (XRR), energy-dispersive X-ray fluorescence (EDXRF), X-ray diffraction (XRD) |
|---|---|
| Supported wafers | Up to 200 mm (open cassette / SMIF load port configurations) |
| Measurement results | EDXRF: film thickness and composition / XRR: film thickness, density and roughness |
| Dimensions | 1612 (W) × 3395 (D) × 2118 (H) mm |
Specifications as published by the maker. See the sources below.
Overview
XTRAIA MF-2000 is Rigaku's XRR, EDXRF and XRD metrology tool. For wafers up to 200 mm, it measures the composition and thickness (EDXRF) and the thickness, density and roughness (XRR) of unpatterned and patterned thin films. It measures product wafers and blanket wafers, from ultra-thin single-layer films to multilayer stacks.
The official page describes it as designed for high-volume production and lists low-contamination wafer handling, position control by pattern recognition, CE marking and SEMI S2/S8 compliance, and SECS/GEM support. It is available in open cassette and SMIF pod configurations.
It carries the HyPix 3000 2D detector for XRR and XRD measurement, and Rigaku says XRR measurement is 5 times faster than on the previous model. The COLORS monochromatic micro X-ray beam module also supports measurement of small areas.
Key features
- Faster XRR measurement with the HyPix 3000 2D detector (5 times the previous model)
- Dynamic range of up to 10⁸ for XRR evaluation from sub-nanometer ultra-thin films to 450 nm thick films
- COLORS monochromatic microspot X-ray beam module and pattern recognition
- Designed to SEMI S2 and SEMI S8, supports SECS/GEM communication
Applications
- FEOL: thickness and composition measurement of SiGe, CoSiₓ, NiSiₓ, SOI, Al, SiON and high-k dielectric/metal gate films
- BEOL: measurement of Cu seed, Cu barrier, Cu plating, Ti/TiN, Ta/TaN and W
- XRF measurement of thickness variation in MRAM processes and XRR measurement of MTJ stacks
FAQ
Which wafer sizes does XTRAIA MF-2000 support?
The official page lists wafers up to 200 mm (and smaller), with open cassette and SMIF load port configurations available.
Other film composition analysis (xrf/ftir)
- AZX 400 · Rigaku
- ONYX 3200 · Rigaku
- TFXRD Lab · Rigaku
- WaferX 310 · Rigaku
- WDA-3650 · Rigaku
- XTRAIA MF-3400 · Rigaku
- XTRAIA TF-3000 · Rigaku
- XTRAIA XD-3200 · Rigaku
All film composition analysis (xrf/ftir) and Japanese suppliers
More from Rigaku
- FSAS II · Wafer substrate inspection equipment
- FSAS III · Wire saws and wafer slicing equipment
- TXRF 3760 · Surface analysis instruments (XPS/SIMS)
- TXRF-V310 · Contamination analysis equipment
- XHEMIS EX-2000 · Film thickness metrology
- XHEMIS TX-2000 · Contamination analysis equipment
- XHEMIS TX-3000 · Contamination analysis equipment
- XRTmicron · Crystal defect inspection equipment
Sources
Film composition analysis (XRF/FTIR)
Last updated: November 13, 2026