Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Wafer manufacturing equipment

Wafer edge polishers3 Japanese makers

Wafer edge polishers polish the beveled rim of a wafer to remove roughness and microcracks left by edge grinding. A rough edge sheds particles and can start slip dislocations during heat treatment.

6 products listed · 6 related categories
Get quotes (4 companies)Inquire (4 companies)

Tick "Add to bulk request" on the cards to send your request only to the companies and products you choose.

  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
How it works
  1. Fill in one form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to the 4 companies in this category. Your details are shared with them only with your consent.
  3. The companies replyEach company usually replies within 2–3 business days.

AdBanner space for Wafer edge polishers is available (one company per category).About advertising →

Ebara

EAC

Ebara's bevel polishing system that uses fixed abrasives to polish the bevel and front and back edge areas of semiconductor wafers, removing defects and unwanted thin films. The edge profile can be controlled by recipe.

TypeBevel polishing with fixed abrasives
Polishing areaBevel, front and back edge areas of the wafer
ConfigurationRecipe-controllable polishing head (bevel profile control)
StandardsSEMI-S2 / CE marking
SpeedFam

EP-300-X

SpeedFam's edge polisher for 12-inch wafers that polishes the upper bevel, lower bevel and edge face of the wafer's outer edge at the same time and also mirror-finishes the inside of the notch and the straight part of the orientation flat. SpeedFam has shipped about 600 units since 1988.

Polishing methodSimultaneous polishing of the upper bevel, lower bevel and edge face (outer edge) + mirror finishing of notch and orientation flat
Wafer size300 mm (bare silicon wafers)
Related modelsEP-200-X / EPD-300-X, EPD-200-X (for device wafers)
Main applicationsMirror finishing of silicon wafer edges
SpeedFam

EPD-300-X / EPD-200-X

SpeedFam's edge polisher that polishes the edges of 300 mm or 200 mm device wafers to improve chip yield. It has a built-in cleaning unit and supports dry-in, dry-out operation.

Supported wafers300 mm / 200 mm device wafers
TypeEdge polishing (built-in cleaning unit, dry-in, dry-out)
Main applicationsImproving chip yield by removing particles and other material from the edge and polishing it
Tokyo Seimitsu (ACCRETECH)

W-GM-4200

A wafer chamfering machine (edge grinding machine) from Tokyo Seimitsu (ACCRETECH). It handles a range of wafer sizes from 50 to 200 mm and many materials, including SiC, GaN, sapphire and silicon.

TypeEdge chamfer grinding of wafers (low-strain grinding; mirror finishing possible)
Wafer sizeModel for 50/100/150 mm, model for 100/150/200 mm
Supported materialsSiC, GaN, sapphire, silicon, glass and other compounds
MeasurementMulti-point wafer thickness measurement before processing; non-contact measurement of diameter and notch depth after processing
Tokyo Seimitsu (ACCRETECH)

W-GM-5200

An edge grinding machine (wafer chamfering machine) for 300 mm wafers from Tokyo Seimitsu (ACCRETECH). A newly developed grinding unit raises spindle rotation accuracy and improves surface roughness.

Wafer sizeΦ300 mm
Measurement functionsMulti-point wafer thickness measurement before processing; non-contact measurement of diameter and notch depth after processing
ProcessLDG (Low Damage Grinding)
OptionsBuilt In Inspection system (face width measurement of the edge and notch)
Tokyo Seimitsu (ACCRETECH)

W-GM-6200

A chamfering machine for 450 mm wafers from Tokyo Seimitsu (ACCRETECH). Part of the W-GM series, it grinds with high accuracy using synchronized interpolation control of the X, Y and θ axes.

Wafer sizeΦ450 mm
ControlSynchronized interpolation control of the X, Y and θ axes
OperationTouch panel
SeriesW-GM series

* Specifications are reference values based on public information. Please confirm exact specifications with the maker.

Other wafer manufacturing equipment


Sources


  1. Ebara: EAC product page
  2. Ebara: semiconductor manufacturing equipment product list
  3. SpeedFam: edge polisher product page
  4. ACCRETECH: W-GM-4200 product page
  5. ACCRETECH: W-GM-5200 product page
  6. ACCRETECH: edge grinding machines
  7. ACCRETECH: W-GM-6200 product page

More on this topic


Japanese equipment by category

Wafer edge polishers

Last updated: November 13, 2026