Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Wafer manufacturing equipment

Compound semiconductor substrate equipment (SiC/GaN)7 Japanese makers

Compound semiconductor substrate equipment grows and processes substrates other than silicon, such as SiC, GaN, GaAs and InP. SiC crystals are mostly grown by physical vapor transport (sublimation), while GaN is usually grown epitaxially on foreign substrates by MOCVD or HVPE.

8 products listed · 6 related categories
Get quotes (8 companies)Inquire (8 companies)

Tick "Add to bulk request" on the cards to send your request only to the companies and products you choose.

  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
How it works
  1. Fill in one form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to the 8 companies in this category. Your details are shared with them only with your consent.
  3. The companies replyEach company usually replies within 2–3 business days.

AdBanner space for Compound semiconductor substrate equipment (SiC/GaN) is available (one company per category).About advertising →

Daiichi Kiden

Solution Growth System

Daiichi Kiden's single-crystal growth system using the solution method. It targets 2- to 8-inch SiC and AlN single crystals and heats to a maximum of 2300 °C by RF induction.

TypeSolution method
Target crystalsSiC and AlN single crystals, 2–8 inch
Heating methodRF induction heating (maximum 2300 °C)
AtmosphereVacuum or inert gas (Ar, He, N2, etc.)
Fujikoshi Machinery

LSL-19A

Fujikoshi Machinery's single-side lapping machine that performs diamond lapping on one side of a wafer. It is said to be suited to processing sapphire, SiC and compound semiconductors.

TypeSingle-side lapping machine (diamond lapping)
Main applicationsSingle-side processing of sapphire, SiC and compound semiconductor wafers
ConfigurationWith forced top ring shaft drive and top ring back-air mechanism
Hamai Industries

HS1200

A single-sided polishing machine from Hamai Industries that mirror-finishes one side of wafers after lapping. The official website presents it on its page on polishing new materials such as sapphire and SiC wafers.

TypeSingle-sided polishing machine (static pressure loading)
Processes2 steps: diamond lapping with a copper plate and diamond powder, and polishing to a surface roughness of 0.1 nanometer
Main applicationsSingle-sided mirror finishing of SiC wafers
Okamoto Machine Tool Works

OGM390NC2HX

Okamoto Machine Tool Works' SiC ingot grinder. After outer diameter finishing, it measures the orientation by XRD and then machines a notch or orientation flat. Supported workpiece sizes are 6″ and 8″.

TypeSiC ingot grinding (with XRD orientation measurement)
Main processesOuter diameter finishing, notch or orientation flat machining
Workpiece size6″, 8″
Related modelsUGM360NC2HX (grinding of both end faces)
Okamoto Machine Tool Works

UGM360NC2HX

Okamoto Machine Tool Works' SiC ingot grinder. It carries an XRD unit, measures the C-plane orientation and then grinds both end faces of the ingot. It handles 6-inch and 8-inch workpieces.

TypeFully automatic SiC ingot processing (grinding of both end faces)
MeasurementBuilt-in XRD, C-plane orientation measurement
Workpiece size6″, 8″
Related modelsOGM390NC2HX (measures orientation by XRD after outer diameter finishing, then machines a notch or orientation flat)
Takatori

GLP-200W

A grinder from Takatori. It uses 2 high-rigidity heads to grind hard, brittle, difficult-to-machine materials such as SiC, GaN, sapphire and LT/LN in workpiece sizes of 4 to 8 inches.

Configuration2 high-rigidity heads
Workpiece sizeΦ4 inch, Φ6 inch, Φ8 inch
Wheel sizeΦ200 or Φ300
Target materialSiC, LT/LN, GaN, sapphire and others
Takatori

MWS-SiC6

Takatori's multi-wire saw designed for cutting 6-inch SiC. A rigid structure and control system aim at stable, high-precision cutting.

Cutting methodMulti-wire saw
Supported ingots6-inch SiC (models up to 10 inch also available)
Related modelsMWS-SiCXα(+) (up to 10 inch)
Main applicationsSlicing wafers from SiC ingots
Takatori

MWS-SiCXα (+)

A wire saw for SiC from Takatori. It cuts up to 10 inches, can cut with φ100 μm wire, and has an automatic exchange system for reels, work rollers and workpieces.

Target materialSiC
Cutting sizeUp to 10 inches
WireCutting with φ100 μm wire possible
AutomationLabor-saving automatic exchange system (reels, work rollers, workpieces)

* Specifications are reference values based on public information. Please confirm exact specifications with the maker.

Other Japanese companies in this field


More companies: Japanese Semiconductor Process Materials Suppliers · Japanese Wafer, Substrate and Photomask Suppliers

Other wafer manufacturing equipment


Key terms


PVT (Physical Vapour Transport) Method · Laser Slicing / Laser Lift-off · Epitaxial Wafer (Epi Wafer) · GaN-on-Silicon (GaN-on-Si) · Sapphire Substrate · Substrate · Vertical Bridgman Method (VB) · Temperature Gradient Method

Sources


  1. Daiichi Kiden: solution growth system product page
  2. Fujikoshi Machinery: product information
  3. Hamai Industries: new materials and polishing page
  4. Okamoto Machine Tool Works: SiC ingot grinder product page
  5. Okamoto Machine Tool Works: SiC Ingot Grinding Machine product page (English)
  6. Takatori: GLP-200W (grinder) product page
  7. Takatori: MWS-SiC6 product page
  8. Takatori: MWS-SiCXα (+) product page

More on this topic


Japanese equipment by category

Compound semiconductor substrate equipment (SiC/GaN)

Last updated: November 13, 2026