Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Backgrinders

Adwill RAD-3010F/12

A 300mm fully automatic BG tape remover that peels BG surface protection tape from wafers by 180° peeling. It has a built-in UV unit that automatically controls irradiance and dose.

Maker: LINTEC · Official product page

LINTEC
  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
Official product page ↗
How it works
  1. Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to LINTEC. Your details are shared with the maker only with your consent.
  3. The maker repliesReplies usually arrive within 2–3 business days.

Can't find a product, or unsure which to choose?

Free consultation

Specifications


Type300mm fully automatic BG tape remover (180° peeling)
Peeling tapeHeat-pressed onto the surface protection tape within 3mm of the wafer edge
UV irradiationBuilt-in sensor provides feedback control of UV irradiance and dose
Supported tapesE series (UV-curable) and P series (non-UV) BG surface protection tapes

Specifications as published by the maker. See the sources below.

Overview


RAD-3010F/12 is a 300mm fully automatic BG tape remover in LINTEC's Adwill brand. It peels BG surface protection tape off wafers after backgrinding. It uses 180° peeling, which keeps stress on the wafer to a minimum, and is said to handle thin wafers as well.

The peeling tape is heat-pressed onto the surface protection tape within 3mm of the wafer edge, which reduces damage to the wafer circuit side and adhesive residue. LINTEC says the amount of peeling tape used stays the same regardless of wafer size, and the tape adheres reliably whether or not there is silicon dust on the surface protection tape.

A built-in sensor provides feedback control to keep UV irradiance and dose constant, so irradiance stays constant until the end of lamp life and peeling remains stable when UV-curable BG surface protection tape is used.

Key features


  • 180° peeling that limits stress on the wafer
  • Peeling tape heat-pressed within 3mm of the wafer edge to reduce circuit-side damage and adhesive residue
  • Constant peeling tape usage regardless of wafer size
  • Automatic feedback control of UV irradiance and dose

Applications


  • Removal of BG surface protection tape after backgrinding
  • Tape removal from thin wafers

FAQ


What peeling method does RAD-3010F/12 use?

The official page says the peeling tape is heat-pressed with a hot plate within 3mm of the wafer edge, and the BG surface protection tape is then peeled from the wafer at a 180° angle.

Terms explained


Glazing (Pad and Wheel) · Temporary Bonding and Debonding (TBDB) · Flexural Strength

Other backgrinders


All backgrinders and Japanese suppliers

More from LINTEC


Sources


  1. LINTEC: Adwill RAD-3010F/12 product page

More on this topic


Last updated: November 13, 2026