AD3000T-HC PLUS
A fully automatic Φ300 mm dicing machine from Tokyo Seimitsu (ACCRETECH). It follows the design of AD3000T-PLUS and supports both wafer handling from FOUPs and frame handling from cassettes.
Maker: Tokyo Seimitsu (ACCRETECH) · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to Tokyo Seimitsu (ACCRETECH). Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Maximum workpiece size | Φ305 mm |
|---|---|
| Maximum frame | 12 inch (SEMI G74-0699) |
| Spindle | Facing dual-axis, 60,000 rpm, rated output 1.8 kW |
| Maximum blade diameter | Φ60 mm (2-inch) |
| Axis speed | X 1,000 mm/s, Y 300 mm/s, Z 80 mm/s |
Specifications as published by the maker. See the sources below.
Overview
AD3000T-HC PLUS is a fully automatic dicing machine for Φ300 mm wafers from Tokyo Seimitsu (ACCRETECH). It follows the design concept of the company's AD3000T-PLUS and supports both processes: wafer handling from FOUP cassettes and frame handling from standard cassettes.
Wafer handling (WH) and frame handling (FH) switch automatically through recipe settings. The company says this cuts changeover work and helps prevent operating errors. A FOUP opener comes standard, and the tool covers everything from half cuts to full cuts.
The whole tool sits in an angled layout, so all work from operation to maintenance is done from the front. Tokyo Seimitsu says 5 units fit in the floor space of 4 earlier units.
Key features
- Automatic WH/FH switching by recipe, with a FOUP opener as standard
- Cutting table in-plane correction (Active-Z) supports height control in half cutting
- Standard support for edge trimming processes
- Servo motors on all of the X, Y and Z axes, with 3-axis synchronized control to shorten processing time
Applications
- Full-cut and half-cut dicing of 300 mm wafers
- Edge trimming before ultra-thinning
FAQ
How does it differ from AD3000T-PLUS?
It follows the AD3000T-PLUS design concept and adds support for both wafer handling from FOUP cassettes and frame handling from standard cassettes.
Terms explained
Other dicing saws
More from Tokyo Seimitsu (ACCRETECH)
- AD2000T/S · Dicing saws
- AD20T/S · Dicing saws
- AD3000T-PLUS · Dicing saws
- AL3000 · Laser dicing equipment
- AltaProv · Wafer probers
- AP3000/AP3000e · Wafer probers
- C-RW Series · Wire saws and wafer slicing equipment
- ChaMP211 · Metal CMP equipment
Sources
Last updated: November 13, 2026