ChaMP232
A CMP system for 200 mm wafers from Tokyo Seimitsu (ACCRETECH). It performs surface-referenced polishing with the Sylphide air-float head and suits SiC, MEMS, micro LEDs, SAW filters and more.
Maker: Tokyo Seimitsu (ACCRETECH) · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to Tokyo Seimitsu (ACCRETECH). Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Wafer size | Φ200 mm / Φ150 mm / Φ100 mm |
|---|---|
| Polishing head | Sylphide air-float head (zone control optional) |
| Head change | Removal about 5 seconds, installation about 10 seconds |
| Target devices | SiC, MEMS, micro LEDs, SAW filters, etc. |
Specifications as published by the maker. See the sources below.
Overview
ChaMP232 is a CMP system for 200 mm wafers from Tokyo Seimitsu and a model in the company's ChaMP series. The company says it combines technology from its precision metrology instruments and semiconductor equipment to meet both the process performance needs of advanced devices and the requirements of volume production fabs.
The polishing head is the Sylphide air-float head. It applies uniform pressure through an air film for surface-referenced polishing, and independent airbags press the wafer, which the company says gives good control and stability, especially in the low-pressure range. Zone control is available as an option.
Head maintenance is simple: removal takes about 5 seconds and installation about 10 seconds. The model is positioned for devices such as SiC, MEMS, micro LEDs and SAW filters.
Key features
- Surface-referenced polishing with the Sylphide air-float head
- Good pressure control and stability in the low-pressure range
- Polishing head removal and installation in about 5 to 10 seconds
- Handles small and mid-size wafers from 100 to 200 mm
Applications
- Planarization of SiC wafers and devices
- CMP of MEMS, micro LEDs and SAW filters
FAQ
Does it support 300 mm wafers?
ChaMP232 is a CMP system for 200 mm wafers, and the product page lists Φ200 mm, Φ150 mm and Φ100 mm as supported sizes. The series also includes ChaMP332 and ChaMP211.
Terms explained
Dishing (CMP) · Stop Layer (Polish Stop) · Fumed Silica · Insulating Film (Dielectric Film) · BPSG / PSG (Borophosphosilicate Glass)
Other oxide cmp equipment
- F-REX300XA · Ebara
- ChaMP332 · Tokyo Seimitsu (ACCRETECH)
More from Tokyo Seimitsu (ACCRETECH)
- AD2000T/S · Dicing saws
- AD20T/S · Dicing saws
- AD3000T-HC PLUS · Dicing saws
- AD3000T-PLUS · Dicing saws
- AL3000 · Laser dicing equipment
- AltaProv · Wafer probers
- AP3000/AP3000e · Wafer probers
- C-RW Series · Wire saws and wafer slicing equipment
Sources
Oxide CMP equipment
Last updated: November 13, 2026