Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Back-end and advanced packaging equipment

Reflow ovens4 Japanese makers

Reflow ovens melt solder paste, solder balls or bumps to form joints. Substrates or wafers pass on a conveyor through preheat, soak, reflow and cooling zones that apply a set temperature profile.

8 products listed · 12 related categories
Get quotes (4 companies)Inquire (4 companies)

Tick "Add to bulk request" on the cards to send your request only to the companies and products you choose.

  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
How it works
  1. Fill in one form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to the 4 companies in this category. Your details are shared with them only with your consent.
  3. The companies replyEach company usually replies within 2–3 business days.

AdBanner space for Reflow ovens is available (one company per category).About advertising →

Hakuto

HVR Series

An inline vacuum reflow furnace made by Hakuto. Robots fully automate workpiece transfer, and its modular design performs the whole solder reflow process (reduction, solder melting and cooling) in one place.

TypeInline vacuum reflow (reduction, solder melting and cooling processed together in the same chamber)
Maximum process temperature450 °C (vacuum)
Maximum heating rate / cooling rate8 °C/sec / 5 °C/sec (450 to 150 °C in about 60 seconds)
Temperature uniformity across the plate±3 °C @ 300 °C
HandlingXYZθ single-axis robots (repeat positioning accuracy ±0.01 mm)
Senju Metal Industry

SNR-GT-B Series

The bump-forming type of Senju Metal Industry's N2 reflow ovens. The company says its proprietary hot-air control technology handles micro bumps 100 μm or less in diameter and keeps a stable low oxygen concentration of 50 ppm or less in all zones of the oven.

TypesN2 reflow oven (bump-forming type)
Supported bumpsMicro bumps 100 μm or less in diameter
Oxygen concentration50 ppm or less in all zones of the oven
Heating/cooling zones (SNR-1451GT-B)14/4
Dimensions (SNR-1451GT-B)7,550×1,560×1,450 mm
Senju Metal Industry

SVR-625GT-C

A vacuum N2 reflow oven from Senju Metal Industry. Proprietary vacuum control technology reduces voids and suppresses spatter, and temperature settings up to 380 °C support high-temperature profiles for power semiconductors.

TypesVacuum N2 reflow oven
Maximum set temperature380 °C
Zone configurationHeating 5, vacuum 1, cooling 1
Conveyor methodPin chain
Dimensions5,550×1,440×1,540 mm
Shinko Seiki

Plasma Reflow System

A reflow system that removes the oxide film on solder layers on wafers with hydrogen radicals generated in a hydrogen plasma and melts the solder under reduced pressure. It achieves both fluxless and void-free reflow.

TypeOxide removal by hydrogen radicals from a hydrogen plasma + melting under reduced pressure
Main applicationsSolder bump formation on wafers
Key featuresFully dry process, fluxless and void-free, no flux cleaning step needed
Shinko Seiki

Vacuum Soldering System

A system that melts solder in vacuum to remove voids and performs fluxless soldering by preheating in a reducing atmosphere. Batch and continuous N2 vacuum soldering systems are available.

TypeSolder melted in vacuum, preheated in a reducing atmosphere (fluxless)
ConfigurationBatch vacuum soldering system, continuous N2 vacuum soldering system
Main applicationsPower device manufacturing, bump formation for flip-chip bonding
Tamura Corporation

TNR15 SERIES

Tamura Corporation's ultra-compact reflow soldering system, 2.2 m long. Tamura says its small footprint makes it widely used for device production and prototype evaluation.

Board sizeMAX. W150 × L150 mm, MIN. W50 × L50 mm (TNR15-225LH)
N2 gas supply99.99% or higher, 0.4 to 0.7 MPa, 150 NL/min or more (TNR15-225LH)
DimensionsW1210 × L2200 × H1370 mm (TNR15-225LH)
Conveyor speed0.1 to 0.7 m/min (TNR15-225LH)
Standard functionsTouch panel control, activated carbon regeneration unit, flux recovery unit, etc.
Tamura Corporation

TNV-MINI SERIES

Tamura Corporation's compact reflow soldering system. It is 3 m long with 8 heating zones, and Tamura says the fine temperature settings allow profiles for a variety of conditions.

Number of zones8 (TNV25-308EM)
Board sizeMAX. W250 × L330 mm, MIN. W50 × L50 mm (TNV25-308EM)
N2 gas supply99.99% or higher, 0.4 to 0.7 MPa, 250 NL/min or more (TNV25-308EM)
DimensionsW1310 × L3060 × H1374 mm (TNV25-308EM)
Conveyor speed0.3 to 1.5 m/min (TNV25-308EM)
Tamura Corporation

TNV VER.Ⅲ SERIES

Tamura Corporation's reflow soldering system. It comes standard with convection control technology and high-efficiency flux recovery, and the lineup includes single-lane units, DUAL units with 2-lane conveyance and TWIN units with separate temperature settings for each of the 2 lanes.

TypeReflow soldering system (SMT)
SeriesSingle-lane, DUAL (2-lane conveyance), TWIN (separate temperature settings for 2 lanes)
Standard featuresConvection control technology, high-efficiency flux recovery
Main applicationsSemiconductor packages, boards, flexible boards, chip components, etc.

* Specifications are reference values based on public information. Please confirm exact specifications with the maker.

Other back-end and advanced packaging equipment


Key terms


Reflow Soldering

Sources


  1. Hakuto: inline vacuum reflow furnace product page
  2. Senju Metal Industry: Reflow ovens product page
  3. Senju Metal Industry: FA equipment catalog (English PDF)
  4. Shinko Seiki: plasma reflow system product page
  5. Shinko Seiki: vacuum soldering system product page
  6. Tamura Corporation: REFLOW OVEN TNR15 SERIES product page
  7. Tamura Corporation: REFLOW OVEN TNV-MINI SERIES product page
  8. Tamura Corporation: REFLOW OVEN TNV VER.Ⅲ SERIES product page

More on this topic


Japanese equipment by category

Reflow ovens

Last updated: November 13, 2026