Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Inspection and metrology equipment

Optical wafer inspection equipment6 Japanese makers

Optical wafer inspection equipment uses laser or broadband light to detect particles, scratches and crystal defects on wafer surfaces at high speed. Brightfield and darkfield methods are both used.

8 products listed · 12 related categories
Get quotes (6 companies)Inquire (6 companies)

Tick "Add to bulk request" on the cards to send your request only to the companies and products you choose.

  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
How it works
  1. Fill in one form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to the 6 companies in this category. Your details are shared with them only with your consent.
  3. The companies replyEach company usually replies within 2–3 business days.

AdBanner space for Optical wafer inspection equipment is available (one company per category).About advertising →

Hamamatsu Photonics

MiNY PL C15740-01

An inspection system for micro LED wafers that uses photoluminescence (PL) measurement. It evaluates shape defects, PL intensity and PL wavelength of micro LED chips on the wafer without contact.

TypePhotoluminescence (PL) measurement
Supported wafers4 inch, 6 inch (contact the company for other sizes)
PL measurement wavelengthsR, G, B
Spatial resolutionStandard mode 1 µm/pixel, high-resolution mode 0.5 µm/pixel
Measurement timeAbout 12 min (10x objective, PL measurement, 4-inch wafer)
Hitachi High-Tech

DI2800

Hitachi's dark-field wafer defect inspection system with illumination and detection optics optimized by scattering intensity simulation.

Inspection methodDark field
Target processesPatterned and unpatterned wafers of φ100/150/200 mm
Key feature0.1 µm sensitivity, 40 wafers per hour or more
Main applicationsProcess monitoring and good-die screening of G&C devices
HORIBA

PLIMA-LED

HORIBA's micro-photoluminescence imaging system for LEDs. It combines PL, AOI (automated optical inspection) and spectral analysis on a single platform to detect defects in micro LEDs and other devices.

TypePL imaging + AOI + spectral analysis
Supported wafers4", 6"
Detection targetsPL: chip size 10 μm or more, pitch 20 μm or more / AOI: minimum detectable chip size 1.5 μm
Excitation light source375 nm laser 50 mW (for blue and green LEDs), 532 nm laser 50 mW (for red LEDs)
Lasertec

LX series

A multi-wavelength wafer inspection system that quickly inspects film thickness, etch variation and CD across the whole wafer using light of several wavelengths.

TypeMulti-wavelength, high-speed full-wafer imaging
Inspection targetVariation in film thickness, etch amount and CD
ConfigurationHigh-resolution model, high-throughput model
Lasertec

MAGICS M5640

A wafer defect inspection and review system that detects tiny defects from wafer manufacturing with 63 laser beams.

Light source532 nm
Maximum detection sensitivity50 nm (PSL on mirror-polished wafers)
Inspection time22 minutes per wafer (300 mm, normal scan)
Nikon

ECLIPSE L300ND / L300N / L200ND / L200N

Large upright microscopes for inspecting 17-inch FPDs, 200 mm/300 mm wafers and similar samples. CFI60-2 optics and a range of illumination support both visual observation and digital imaging.

SeriesL300N and L200N (reflected), L300ND and L200ND (reflected/transmitted)
Reflected observation methodsBrightfield, darkfield, simple polarizing, DIC, epi-fluorescence (except L200N)
StageL3-S12 14 × 12 stage, L2-S8A 8 × 8 stage
Antistatic functionDecay time from 1000 to 10 V: 0.2 s or less
ObjectivesCFI60-2/CFI60 objective series
Toray Engineering

INSPECTRA® FR-Ⅲ

A wafer visual inspection system that handles tape frames. It inspects diced wafers for visual defects.

TypeOptical visual inspection
Main applicationsInspection of diced wafers (on tape frames)
Toray Engineering

INSPECTRA® SR-Ⅳ

A semiconductor wafer visual inspection system that runs high-magnification inspection about 2x faster than the earlier SR-Ⅲ. A good-product learning algorithm (DSI comparison method) absorbs process variation and detects the target defects.

Wafer size2 to 12 inch
TypeOptical visual inspection (DSI comparison method)
Key featureAI-ADC function; differential interference optics and back side/edge inspection options

* Specifications are reference values based on public information. Please confirm exact specifications with the maker.

Other inspection and metrology equipment


Sources


  1. Hamamatsu Photonics: MiNY PL C15740-01 product page
  2. Hamamatsu Photonics: Micro LED PL inspection system features
  3. Hitachi High-Tech: DI2800 product page
  4. HORIBA: PLIMA-LED product page
  5. Lasertec: LX series product page
  6. Lasertec: MAGICS M5640 product page
  7. Nikon: ECLIPSE L300ND / L300N / L200ND / L200N product page
  8. TASMIT (Toray Engineering): INSPECTRA® series product page

More on this topic


Japanese equipment by category

Optical wafer inspection equipment

Last updated: November 13, 2026