Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Test and reliability equipment

Decapsulation and cross-sectioning equipment2 Japanese makers

Decapsulation and cross-sectioning equipment prepares samples for failure analysis. It exposes the chip surface inside a molded package and creates cross-sections of the area to be examined.

9 products listed · 12 related categories
Get quotes (2 companies)Inquire (2 companies)

Tick "Add to bulk request" on the cards to send your request only to the companies and products you choose.

  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
How it works
  1. Fill in one form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to the 2 companies in this category. Your details are shared with them only with your consent.
  3. The companies replyEach company usually replies within 2–3 business days.

AdBanner space for Decapsulation and cross-sectioning equipment is available (one company per category).About advertising →

Hitachi High-Tech

ArBlade® 5000

The top model of ion milling systems for preparing electron microscope samples. It supports both cross-section milling and flat milling.

Processing methodAr ion milling (hybrid of cross-section and flat)
Processing speedCross-section milling rate of 1 mm/h or more
Processing rangeMilling width 8 mm (slide milling holder)
Main applicationsPreparing cross-section and flat samples for SEM observation
Hitachi High-Tech

Ethos NX5000

Hitachi High-Tech's FIB-SEM. A FIB of up to 100 nA mills quickly, and micro-sampling plus a triple-beam configuration with an Ar/Xe ion beam produces TEM specimens with little damage.

FIB resolution4 nm (30 kV)
FIB beam current100 nA (Ga liquid metal ion source)
SEM resolution1.5 nm (1 kV), 0.7 nm (15 kV)
Electron sourceCold field emission
Maximum specimen size150 mm diameter
Hitachi High-Tech

IM4000II

The standard model of Hitachi High-Tech's ion milling systems, which prepare cross-section and flat specimens for electron microscopy with an Ar ion beam. Its cross-section milling rate on Si is 500 µm/h or more.

TypeIon milling with Ar (argon) gas (cross-section milling and flat milling)
Acceleration voltage0.0 to 6.0 kV
Maximum milling rate500 µm/h or more (Si, cross-section milling)
Maximum specimen sizeCross-section: 20 (W) × 12 (D) × 7 (H) mm; flat: Φ50 × 25 (H) mm
Cooling temperature control0 to -100 °C (optional)
JEOL

IB-19520CCP

A cooling cross section polisher that processes samples with an ion beam while cooling them with liquid nitrogen. It limits thermal damage and supports air-isolated processing and observation with a transfer vessel.

Ion acceleration voltage2 to 8 kV
Milling speed500 μm/h or more (acceleration voltage 8 kV, average over 2 hours, Si equivalent)
CoolingSpecimen stage cooled to -120 °C or below, cooling held for 8 hours or more
Processing modesCross-section milling, flat milling, rotating cross-section milling, ion beam sputter coating
JEOL

Cross Section Polisher™ IB-19530CP

A cross-section sample preparation system that performs cross-section ion milling, flat milling and sputter coating by changing holders on a multi-purpose stage.

Processing methodCross-section milling with an Ar ion beam
Processing speed500 µm/h or more (accelerating voltage 8 kV)
Processing rangeStandard holder: 11 mm wide × 10 mm long × 2 mm thick
Main applicationsSample preparation for cross-section observation and analysis
JEOL

IB-19540CP

A cross section polisher that uses an ion beam to prepare cross-section samples for electron microscopy. A high-throughput ion source is standard, and a cooled version, IB-19550CCP, is also available.

TypeCross-section sample preparation with an ion beam
Standard milling rate1,200 μm/h or more (silicon wafer, ion energy 10 keV, 1 hour of processing)
SeriesIB-19540CP, IB-19550CCP (cooling cross section polisher)
Cooling (IB-19550CCP)8 hours of processing at -120 °C
JEOL

JIB-4700F

A multi-beam processing and observation system with an SEM column and a Ga focused ion beam (FIB) column. It performs SEM observation at 1.6 nm resolution at 1 kV and FIB processing at up to 90 nA in one system.

ConfigurationSEM column + Ga FIB column
SEM resolution1.2 nm (15 kV, GB mode) / 1.6 nm (1 kV, GB mode)
SEM probe current1 pA to 300 nA
FIBAcceleration voltage 1 to 30 kV, image resolution 4.0 nm (30 kV), probe current 1 pA to 90 nA
JEOL

JIB-PS500i

A JEOL FIB-SEM that supports TEM sample preparation. A Ga ion beam of up to 100 nA processes large areas, and the system repeats thinning and STEM observation in place to prepare FinFET and 3D NAND samples.

SEM image resolution0.7 nm (15 kV) / 1.4 nm (1 kV)
FIB image resolution3 nm (30 kV)
FIB beam current1.0 pA to 100 nA (13 steps, 30 kV)
Ion sourceGa liquid metal ion source
Specimen movement rangeX/Y: 130 mm, Z: 1.0 to 40 mm, T: -40.0 to 93.0°
JEOL

STEMPLING

JEOL's automated TEM lamella preparation system, which automates TEM sample preparation by FIB. It works with JIB-4700F and JIB-4000PLUS and prepares 5 types of samples with standard recipes.

ConfigurationAutomated TEM lamella preparation software for FIB
Compatible modelsJIB-4700F, JIB-4000PLUS
Standard recipes5 types, including TEM samples and cross-section samples
Continuous preparation example10 samples in about 8 hours (lamella 10 μm wide × 7 μm high, 100 nm thick)

* Specifications are reference values based on public information. Please confirm exact specifications with the maker.

Other test and reliability equipment


Sources


  1. Hitachi High-Tech SI NEWS (ArBlade 5000)
  2. Hitachi High-Tech: Ethos NX5000 Series product page (US site)
  3. Hitachi High-Tech: ion milling system IM4000II product page
  4. JEOL: IB-19520CCP product page
  5. JEOL: IB-19530CP product page
  6. JEOL: IB-19540CP / IB-19550CCP product page
  7. JEOL: JIB-4700F product page
  8. JEOL: JIB-PS500i product page
  9. JEOL: STEMPLING product page

More on this topic


Japanese equipment by category

Decapsulation and cross-sectioning equipment

Last updated: November 13, 2026