IML-5-1 / IML-6-1 / IML-8-1 / IML-8-2
A single-wafer ion beam milling system that can process even low-reactivity materials by physical etching with an Ar ion beam. It is used for MEMS electrodes, RF filters, and interconnect and electrode processing of compound semiconductors.
Maker: Hitachi High-Tech · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to Hitachi High-Tech. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Type | Single-wafer ion beam milling (ion source voltage 300 to 1000 V, current density up to 1 mA/cm2) |
|---|---|
| Supported wafers | Φ5 inch × 1 (IML-5-1), Φ6 inch × 1 (IML-6-1), Φ8 inch × 1 (IML-8-1), Φ8 inch × 2 (IML-8-2) |
| Ion source size | Φ200 / Φ250 / Φ350 / Φ300 |
| Holder | Rotation and tilt, water-cooled or gas-cooled |
| Options | Filamentless microwave neutralizer, EPD (endpoint detector), reactive gas support |
Specifications as published by the maker. See the sources below.
Overview
Hitachi High-Tech's single-wafer ion beam milling systems consist of the models IML-5-1, IML-6-1, IML-8-1 and IML-8-2. Because they use physical etching with an argon ion beam, they can process materials regardless of their reactivity, and the etching rate can be controlled high or low.
Target substrates are 1 wafer of Φ5 inch for IML-5-1, Φ6 inch for IML-6-1 and Φ8 inch for IML-8-1, and 2 wafers of Φ8 inch for IML-8-2. Ion source voltage is 300 to 1000 V and current density is about 1 mA/cm2. The holder rotates and tilts and is water-cooled or gas-cooled. The company says a configuration with 2 process chambers is also possible.
The MEMS page gives processing examples for PZT, LN, LT, NiFe, Au and multilayer films. It highlights suppression of piezoelectric property loss and crystal structure change by the cooling mechanism, suppression of charging by a proprietary neutralization mechanism, and selective etching with an endpoint detector.
Key features
- Physical etching with an Ar beam that does not depend on material reactivity
- Taper angle adjusted by controlling beam incidence and divergence angles
- Filamentless microwave neutralizer and endpoint detector (optional)
- Single-wafer processing of Φ5 to Φ8 inch, and a 2-chamber configuration is possible
Applications
- Fine electrode processing for MEMS
- Interconnect and electrode processing for RF filters and compound semiconductors
- Fine pattern processing for magnetic sensors
FAQ
Can reactive gases be used?
The official page lists reactive gas support as an option.
Other etchers by material
- NC8000 · Canon ANELVA
- EIS-1500 · Elionix
- 10IBE / 20IBE-C / 20IBE-J · Hakuto
- EMCP Etch Chamber · Hitachi High-Tech
- APX300 · Panasonic Connect
- Episode™ UL · Tokyo Electron (TEL)
More from Hitachi High-Tech
- 9000 series · Polysilicon etchers
- ArBlade® 5000 · Decapsulation and cross-sectioning equipment
- Batch Type Wet Station · Batch wafer cleaning equipment
- CG7300 · CD-SEMs
- CR7300 · Review SEMs
- CS5000 · CD-SEMs
- CT1000 · Review SEMs
- CV7300 · CD-SEMs
Sources
Last updated: November 13, 2026