Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Front-end equipment

Etchers by material6 Japanese makers

Etchers in this category are designed around a particular material or etch mechanism, such as selective removal of oxide or nitride, rather than general-purpose plasma etching.

7 products listed · 12 related categories
Get quotes (6 companies)Inquire (6 companies)

Tick "Add to bulk request" on the cards to send your request only to the companies and products you choose.

  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
How it works
  1. Fill in one form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to the 6 companies in this category. Your details are shared with them only with your consent.
  3. The companies replyEach company usually replies within 2–3 business days.

AdBanner space for Etchers by material is available (one company per category).About advertising →

Canon ANELVA

NC8000

A Canon ANELVA etching system that processes stacked films of hard-to-etch materials, such as those in MRAM, in one pass with an ion beam etching module. It can run through protective film deposition without breaking vacuum.

TypeIon beam etching
Substrate size∅8 inch, ∅12 inch
Number of modulesUp to 5 modules
Optional modulesOxidation, protective film deposition (CVD, sputtering)
Elionix

EIS-1500

ELIONIX's ECR ion beam etching system. It is an anisotropic dry etching system using an ECR ion source and handles samples up to Φ6 inch.

Ion gunECR ion gun
Acceleration voltage300 V to 2000 V
Beam current densityAr: 0.15 to 0.2 mA/cm² or more (at 700 V acceleration)
Effective beam diameterΦ108 mm (at maximum)
Maximum sample sizeΦ6 inch
Hakuto

10IBE / 20IBE-C / 20IBE-J

A series of ion beam milling systems jointly developed by NS and Hakuto. They carry a Kaufman-type ion source and are used to process hard-to-etch materials such as Au, Pt and magnetic materials, as well as multilayer metal films.

TypeIon beam milling (Kaufman-type ion source)
Series10IBE (R&D, small) / 20IBE-C (mid-size) / 20IBE-J (volume production and large substrates, large)
Substrate size and count10IBE: φ4 inch × 1 / 20IBE-C: φ3 inch × 8, φ4 inch × 6, etc. / 20IBE-J: φ4 inch × 12, φ6 inch × 8, etc.
Ion source10IBE: 10 cm / 20IBE-C and 20IBE-J: 20 cm
Hitachi High-Tech

EMCP Etch Chamber

An etch chamber for non-volatile materials that uses EMCP (electro magnetically coupled plasma). It integrates cleaning technology and is used for cell processing of next-generation memory such as MRAM, FeRAM and ReRAM.

TypeEMCP (Electro Magnetically Coupled Plasma) plasma source, dual induction coils
Supported wafersSi: 200 mm, 300 mm (HDD: 150 mm, 200 mm)
Supported materialsAl2O3, Ni alloys, Cr alloys, Fe alloys, Ta, Ir, Mn, Pt alloys, Au, PZT, SBT and others
Main usesNext-generation memory (FeRAM, MRAM, ReRAM) cells, HDD heads
Hitachi High-Tech

IML-5-1 / IML-6-1 / IML-8-1 / IML-8-2

A single-wafer ion beam milling system that can process even low-reactivity materials by physical etching with an Ar ion beam. It is used for MEMS electrodes, RF filters, and interconnect and electrode processing of compound semiconductors.

TypeSingle-wafer ion beam milling (ion source voltage 300 to 1000 V, current density up to 1 mA/cm2)
Supported wafersΦ5 inch × 1 (IML-5-1), Φ6 inch × 1 (IML-6-1), Φ8 inch × 1 (IML-8-1), Φ8 inch × 2 (IML-8-2)
Ion source sizeΦ200 / Φ250 / Φ350 / Φ300
HolderRotation and tilt, water-cooled or gas-cooled
OptionsFilamentless microwave neutralizer, EPD (endpoint detector), reactive gas support
Panasonic Connect

APX300

Panasonic Connect's fully automatic batch dry etching system for wafers up to 6 inch. It has a proprietary ICP plasma source and a batch ESC electrode that chucks each substrate directly.

Plasma sourceICP plasma
Wafers processed simultaneouslyφ4 inch × 7, φ6 inch × 3
Target wafersStandard φ100 mm with orientation flat
Process gases4 lines standard (expandable to max. 6 lines: chlorine-based gases, fluorine-based gases, Ar, O2, He, etc.)
Equipment dimensionsW1350 mm × D2230 mm × H2000 mm
Tokyo Electron (TEL)

Episode™ UL

Tokyo Electron's 300 mm etch platform with a choice of up to 12 chambers. Launched in 2020, it handles both dielectric and conductor etching.

Wafer size300 mm
TypeReactive ion etching (RIE)
Chamber configuration4 to 12 chambers (face-to-face layout)
Main applicationsDielectric and conductor etching for advanced logic and memory

* Specifications are reference values based on public information. Please confirm exact specifications with the maker.

Other front-end equipment


Sources


  1. Canon ANELVA: NC8000 etching system product page
  2. ELIONIX: EIS-1500 product page
  3. Hakuto: ion beam milling systems product page
  4. Hitachi High-Tech: EMCP Etch Chamber product page (English)
  5. Hitachi High-Tech: single-wafer ion beam milling system product page
  6. Hitachi High-Tech: MEMS device equipment, ion milling system page
  7. Panasonic Connect: dry etcher APX300 product page
  8. Tokyo Electron: Episode UL series product page

More on this topic


Japanese equipment by category

Etchers by material

Last updated: November 13, 2026