BS series
An electron beam evaporation system for research and development. It can combine an electron gun, a bombardment evaporation source and resistive heating, and supports lift-off deposition with less substrate damage thanks to a backscattered electron trap.
Maker: JEOL · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to JEOL. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Type | Electron beam evaporation (can be combined with a bombardment evaporation source and resistive heating) |
|---|---|
| Configuration | Box type, bell jar type, multi-source co-evaporation type, roll-to-roll type |
| Substrate heating | Up to 300 °C standard, up to 800 °C optional |
| Vacuum performance | Ultimate pressure 8 × 10-5 Pa or lower, deposition pressure 5 × 10-2 Pa or lower |
Specifications as published by the maker. See the sources below.
Overview
BS series is JEOL's electron beam evaporation system for research and development. Evaporation sources can be an electron gun, a bombardment evaporation source or resistive heating, and the electron gun can be combined with either a bombardment source or resistive heating. Various optional mechanisms extend the system to fit each application.
The electron gun heats refractory metals, oxides with low thermal conductivity and sublimating materials directly in a water-cooled copper crucible to evaporate them. Combined with a backscattered electron trap, it greatly reduces the backscattered electrons that reach the substrate. JEOL says this limits substrate heating and damage, which leads to better adhesion and stable lift-off.
Box, bell jar, multi-source co-evaporation and roll-to-roll types are available. Substrate heating goes up to 300 °C as standard and up to 800 °C as an option. A JEOL user interview describes Meijo University using it to form electrodes for nitride optical devices such as surface-emitting lasers and deep-ultraviolet LEDs.
Key features
- Combination of electron gun, bombardment evaporation source and resistive heating
- Less substrate damage and stable lift-off with a backscattered electron trap
- 4 system types and custom substrate holders
- Automatic deposition with a quartz crystal film thickness controller
Applications
- Electrode formation for nitride optical devices (surface-emitting lasers, deep-ultraviolet LEDs)
- Electrode deposition for MEMS
- Lift-off deposition on resist patterns
Other vacuum evaporation equipment
- Temescal FC-3800 · Ferrotec
- Temescal FC-4400 · Ferrotec
- Temescal UEFC-4900 · Ferrotec
- Temescal UEFC-5700 · Ferrotec
- PMC · Shincron
- SIC · Shincron
- Sapio Series · Showa Shinku
- SEC-22C · Showa Shinku
More from JEOL
- HAXIS LIM · Failure analysis equipment
- IB-19520CCP · Decapsulation and cross-sectioning equipment
- Cross Section Polisher™ IB-19530CP · Decapsulation and cross-sectioning equipment
- IB-19540CP · Decapsulation and cross-sectioning equipment
- JAMP-9510F · Surface analysis instruments (XPS/SIMS)
- JBX-3050MV/S · Electron-beam mask writers
- JBX-3200MVS · Electron-beam mask writers
- JBX-8100FS · Electron-beam direct write systems
Sources
Vacuum evaporation equipment
Last updated: November 13, 2026