IB-19520CCP
A cooling cross section polisher that processes samples with an ion beam while cooling them with liquid nitrogen. It limits thermal damage and supports air-isolated processing and observation with a transfer vessel.
Maker: JEOL · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to JEOL. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Ion acceleration voltage | 2 to 8 kV |
|---|---|
| Milling speed | 500 μm/h or more (acceleration voltage 8 kV, average over 2 hours, Si equivalent) |
| Cooling | Specimen stage cooled to -120 °C or below, cooling held for 8 hours or more |
| Processing modes | Cross-section milling, flat milling, rotating cross-section milling, ion beam sputter coating |
Specifications as published by the maker. See the sources below.
Overview
IB-19520CCP is JEOL's cooling cross section polisher. It is a cross-section sample preparation system that processes samples with an ion beam while cooling them with liquid nitrogen, and cooling limits thermal damage during processing. JEOL says cooled processing suppresses the interface voids seen with normal processing.
The ion acceleration voltage is 2 to 8 kV, and the milling speed is 500 μm/h or more (acceleration voltage 8 kV, average over 2 hours, Si equivalent). The specimen stage can be cooled to -120 °C or below, the cooling temperature can be set between -120 and 0 °C, and cooling holds for 8 hours or more. It also supports automatic switching between fast processing and finishing, and intermittent processing that alternates irradiation and pauses.
By changing function holders, one system performs cross-section milling, flat milling, rotating cross-section milling and ion beam sputter coating. With a transfer vessel, samples can be handled from processing to observation without exposure to air.
Key features
- Cross-section processing with limited thermal damage through liquid nitrogen cooling
- Automatic switching between fast processing and finishing, intermittent processing
- 4 processing modes by changing function holders
- Air-isolated processing and observation with a transfer vessel
Applications
- Sample preparation for cross-section observation of interfaces such as Si wafer bonding surfaces
- Cross-section sample preparation of printed circuit boards
FAQ
What does cooling achieve?
In an example with galvanized steel sheet, JEOL shows that voids at the iron-zinc interface seen with normal processing do not appear with cooled processing. In an example of a Si wafer bonding surface, excessive cooling to -150 °C created gaps, while temperature-controlled cooling at -20 °C showed no gaps.
Other decapsulation and cross-sectioning equipment
- ArBlade® 5000 · Hitachi High-Tech
- Ethos NX5000 · Hitachi High-Tech
- IM4000II · Hitachi High-Tech
- Cross Section Polisher™ IB-19530CP · JEOL
- IB-19540CP · JEOL
- JIB-4700F · JEOL
- JIB-PS500i · JEOL
- STEMPLING · JEOL
All decapsulation and cross-sectioning equipment and Japanese suppliers
More from JEOL
- BS series · Vacuum evaporation equipment
- HAXIS LIM · Failure analysis equipment
- JAMP-9510F · Surface analysis instruments (XPS/SIMS)
- JBX-3050MV/S · Electron-beam mask writers
- JBX-3200MVS · Electron-beam mask writers
- JBX-8100FS · Electron-beam direct write systems
- JBX-A9 · Electron-beam direct write systems
- JEM-ACE200F · Electron microscopes for observation (SEM/TEM)
Sources
Decapsulation and cross-sectioning equipment
Last updated: November 13, 2026