Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Decapsulation and cross-sectioning equipment

IM4000II

The standard model of Hitachi High-Tech's ion milling systems, which prepare cross-section and flat specimens for electron microscopy with an Ar ion beam. Its cross-section milling rate on Si is 500 µm/h or more.

Maker: Hitachi High-Tech · Official product page

Hitachi High-Tech
  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
Official product page ↗
How it works
  1. Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to Hitachi High-Tech. Your details are shared with the maker only with your consent.
  3. The maker repliesReplies usually arrive within 2–3 business days.

Can't find a product, or unsure which to choose?

Free consultation

Specifications


TypeIon milling with Ar (argon) gas (cross-section milling and flat milling)
Acceleration voltage0.0 to 6.0 kV
Maximum milling rate500 µm/h or more (Si, cross-section milling)
Maximum specimen sizeCross-section: 20 (W) × 12 (D) × 7 (H) mm; flat: Φ50 × 25 (H) mm
Cooling temperature control0 to -100 °C (optional)

Specifications as published by the maker. See the sources below.

Overview


IM4000II is the standard model of Hitachi High-Tech's ion milling systems. Using an argon ion beam, it supports both cross-section milling and flat milling (Flat Milling®). It is used to prepare cross-section and surface specimens for electron microscope observation.

In cross-section milling it reaches a milling rate of 500 µm/h or more (the depth after 1 hour of milling at 6 kV accelerating voltage with Si protruding 100 µm from the mask edge), which the company says is effective for preparing cross-sections of hard materials. It also produces smooth cross-sections of composite materials that mix materials of different hardness and milling rate.

In flat milling the ion beam can irradiate an area up to φ32 mm, which is used to remove scratches and strain left by mechanical polishing, remove surface layers of the specimen and remove FIB milling damage. A cooling temperature control function using liquid nitrogen and an air-isolation holder unit are available as options.

Key features


  • Supports both cross-section milling and flat milling
  • Cross-section milling rate of 500 µm/h or more on Si
  • Milling width and depth adjusted by selecting the swing angle (cross-section ±15°, ±30° or ±40°)
  • Cooling temperature control, air-isolation holder and high beam-resistance mask (optional)

Applications


  • Cross-section preparation for analyzing defects such as cracks and voids
  • Cross-section preparation for evaluating laminated interfaces and crystal information
  • Removal of FIB milling damage and mechanical polishing scratches

Other decapsulation and cross-sectioning equipment


All decapsulation and cross-sectioning equipment and Japanese suppliers

More from Hitachi High-Tech


Sources


  1. Hitachi High-Tech: ion milling system IM4000II product page

More on this topic


Last updated: November 13, 2026