JIB-PS500i
A JEOL FIB-SEM that supports TEM sample preparation. A Ga ion beam of up to 100 nA processes large areas, and the system repeats thinning and STEM observation in place to prepare FinFET and 3D NAND samples.
Maker: JEOL · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to JEOL. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| SEM image resolution | 0.7 nm (15 kV) / 1.4 nm (1 kV) |
|---|---|
| FIB image resolution | 3 nm (30 kV) |
| FIB beam current | 1.0 pA to 100 nA (13 steps, 30 kV) |
| Ion source | Ga liquid metal ion source |
| Specimen movement range | X/Y: 130 mm, Z: 1.0 to 40 mm, T: -40.0 to 93.0° |
Specifications as published by the maker. See the sources below.
Overview
JIB-PS500i is a focused ion beam system (FIB-SEM) from JEOL. It has 3 functions that support TEM sample preparation, and JEOL states that it handles everything from sample preparation to TEM observation in one workflow.
TEM-LINKAGE uses a dual-tilt cartridge and TEM holder to simplify sample transfer to and from the TEM. CHECK-AND-GO repeats thinning and STEM observation so the sample can be checked in place. With the optional STEMPLING2 automated TEM sample preparation system, preparation is automated and operator-to-operator quality variation is reduced.
The FIB processes large areas quickly with a Ga ion beam of up to 100 nA. The SEM has a super conical lens that improves observation at low accelerating voltages. A large specimen chamber and a 5-axis fully eucentric stage allow processing and observation over the full surface of a 130 mmφ sample.
Key features
- TEM sample preparation support with TEM-LINKAGE and CHECK-AND-GO
- STEMPLING2 automated TEM sample preparation system (option)
- Large-area processing with a Ga ion beam of up to 100 nA
- 5-axis stage with the AVERT Engine for 3D collision checking
Applications
- TEM sample preparation of 5 nm design rule FinFET devices
- FIB cross-section observation of 3D NAND flash memory
- Observation and EDS mapping of SiC power devices
FAQ
Can TEM sample preparation be automated?
JEOL states that preparation can be automated with the optional STEMPLING2 automated TEM sample preparation system.
Other decapsulation and cross-sectioning equipment
- ArBlade® 5000 · Hitachi High-Tech
- Ethos NX5000 · Hitachi High-Tech
- IM4000II · Hitachi High-Tech
- IB-19520CCP · JEOL
- Cross Section Polisher™ IB-19530CP · JEOL
- IB-19540CP · JEOL
- JIB-4700F · JEOL
- STEMPLING · JEOL
All decapsulation and cross-sectioning equipment and Japanese suppliers
More from JEOL
- BS series · Vacuum evaporation equipment
- HAXIS LIM · Failure analysis equipment
- JAMP-9510F · Surface analysis instruments (XPS/SIMS)
- JBX-3050MV/S · Electron-beam mask writers
- JBX-3200MVS · Electron-beam mask writers
- JBX-8100FS · Electron-beam direct write systems
- JBX-A9 · Electron-beam direct write systems
- JEM-ACE200F · Electron microscopes for observation (SEM/TEM)
Sources
Decapsulation and cross-sectioning equipment
Last updated: November 13, 2026