Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Laser dicing equipment

DDS2010

An automatic die separator for Φ200 mm that separates wafers into small or long chips after stealth dicing in one machine, combining expansion and scan breaking.

Maker: DISCO · Official product page

DISCO
  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
Official product page ↗
How it works
  1. Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to DISCO. Your details are shared with the maker only with your consent.
  3. The maker repliesReplies usually arrive within 2–3 business days.

Can't find a product, or unsure which to choose?

Free consultation

Specifications


Maximum workpiece sizeΦ8 inch
Supported chip size0.1 to 0.5 mm (short side), up to 20 mm (long side, long chips only)
Wafer remount accuracy (frame mount)±2.5 mm in X/Y, ±3° in θ
Dimensions (W × D × H)718 × 897 × 1,608 mm (excluding signal tower)
WeightAbout 450 kg

Specifications as published by the maker. See the sources below.

Overview


DDS2010 is an automatic die separator from DISCO for Φ200 mm wafers. To separate wafers after stealth dicing with high yield and high throughput, it performs tape expansion and breaking in one machine.

Stealth dicing focuses a laser inside the workpiece to form a modified layer, and the wafer is then separated by methods such as tape expansion. It is considered effective for narrowing the street width of small and long chips, such as IC tags and line sensors. DDS2010 uses a scan bar to break chips left unseparated after expansion, reducing unseparated chips.

Scan breaking separates at a constant speed regardless of chip size, so it takes less time than three-point bend breaking, which stops at each line. After separation, the wafer is remounted onto a tape frame of the same size as the wafer diameter while keeping the spacing between chips.

Key features


  • Tape expansion and scan breaking in one machine
  • Separation at a constant speed regardless of chip size
  • No protective sheet needed on the pattern side during breaking
  • Remounting onto a tape frame the same size as the wafer diameter after separation

Applications


  • Separation of small and long chips, such as IC tags and line sensors
  • Wafer separation after stealth dicing

Other laser dicing equipment


All laser dicing equipment and Japanese suppliers

More from DISCO


Sources


  1. DISCO: DDS2010 product page

More on this topic


Last updated: November 13, 2026