EIS-220P
ELIONIX's ECR ion beam sputtering system. It has 2 ion guns, for etching and for deposition, and can alternate etching and deposition on a sample while keeping the vacuum.
Maker: Elionix · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to Elionix. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Configuration | 2 ECR ion guns (for etching and for deposition) |
|---|---|
| Acceleration voltage | 20 V to 3000 V |
| Ionization gases | Ar, N₂, O₂, CF₄ and others (consult the company about CF-based gases) |
| Maximum sample size | Main stage: Φ4 inch / sub stage: Φ3 inch |
| Ultimate vacuum | 4×10⁻⁴ Pa or lower |
Specifications as published by the maker. See the sources below.
Overview
EIS-220P is ELIONIX's ECR ion beam sputtering system. The official website presents it as a deposition and etching system using ECR ion beams. By assigning its 2 ion guns to etching and deposition, it can repeat etching and deposition alternately while keeping the vacuum, without taking the sample out of the chamber.
Adjusting the angle of the sample stage changes the ion beam incidence angle, enabling oblique etching controlled to the desired angle. In addition to inert gases such as Ar and Xe, active gases such as O₂ and CF₄ can be used as the ion source, so it also supports reactive etching.
There are 2 sample stages: a main stage (rotation and 1-axis tilt, with water cooling, Φ4 inch) and a sub stage (rotation, with water cooling, Φ3 inch). The pumping system consists of a turbomolecular pump and a dry pump, and the recommended installation space is W 3000 mm × D 2000 mm × H 1500 mm.
Key features
- 2 ECR ion guns, for etching and for deposition
- Alternating etching and deposition while keeping the vacuum
- Oblique etching by adjusting the stage angle
- Supports inert gases and active gases (O₂, CF₄ and others)
Applications
- Fabrication of straight and curved lift-off patterns with a 50 nm line width and 100 nm height (example)
- Fabrication of mushroom shapes with a T-gate process and a lift-off process (example)
- Oblique etching with controlled angles
FAQ
What is the beam current density of EIS-220P?
According to the official specification, it is 1.5 mA/cm² or more with Ar (at 2 kV acceleration). The effective ion beam diameter is Φ20 mm at maximum (FWHM 35 mm).
Terms explained
Sputtering Target · Magnetron Sputtering · DC Discharge (Glow Discharge) · Collimator (Collimated Sputtering) · Mean Free Path
Other sputtering equipment
- FC7100 · Canon ANELVA
- IC7500 · Canon ANELVA
- Endeavor™ · Plasma-Therm Japan
- CFS-4EP-LL · Shibaura Mechatronics
- SWN-5000 / BM-1400W · Shibaura Mechatronics
- SCP-BT · Shincron
- RFS-201 · ULVAC Techno
- CS · ULVAC
More from Elionix
- EIS-1500 · Etchers by material
- EIS-200ERP · Dry etching equipment
- ELS-BODEN series · Electron-beam direct write systems
- ELS-BODEN Σ · Electron-beam direct write systems
- ELS-HAYATE · Electron-beam direct write systems
- ELS-ORCA · Electron-beam direct write systems
Sources
Sputtering equipment
Last updated: November 13, 2026