CFS-4EP-LL
A sputtering system for R&D from Shibaura Mechatronics. It is a load-lock type that can carry up to 4 sputter sources and is used for a wide range of deposition, from R&D to high-mix, low-volume production.
Maker: Shibaura Mechatronics · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to Shibaura Mechatronics. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Processing method | Load-lock type (side sputtering, rotating table) |
|---|---|
| Sputter sources | Up to 4 (normal or strong magnetic field selectable) |
| Table temperature control | Heating up to 600 °C / water cooling |
| Supported functions | Co-sputtering, bias sputtering, variable target-substrate distance, automatic feeder |
| Main applications | Semiconductors, electronic components, LEDs, LDs, sensors, various wafers, MEMS and more |
Specifications as published by the maker. See the sources below.
Overview
CFS-4EP-LL is a sputtering system for R&D from Shibaura Mechatronics. It can be used for a wide range of deposition, from R&D to high-mix and low-volume production, and the official site says many units have been delivered to universities, research institutes and companies. Listed applications include semiconductors, electronic components, LEDs, LDs, sensors, various wafers and MEMS.
It is a load-lock type with side sputtering and a rotating table. It holds up to 4 sputter sources (normal or strong magnetic field selectable), and the table supports heating up to 600 °C or water cooling. Fully automatic operation by recipe is possible, and it supports co-sputtering, bias sputtering, variable target-substrate distance and an automatic feeder.
Typical deposition materials shown include dielectric films such as AlN, SiN, SiO2, ZrO and TiO2, transparent conductive films such as ITO and ZnO, and metal films such as Au, Ag, Cu, Si, Ti, Sn, Cr, Al, Ni and DLC.
Key features
- Load-lock type that can carry up to 4 sputter sources
- Fully automatic operation by recipe
- Supports co-sputtering, bias sputtering and variable target-substrate distance
- Table heating up to 600 °C or water cooling
Applications
- R&D deposition for semiconductors, electronic components, MEMS and more
- Formation of dielectric, transparent conductive and metal films
- High-mix and low-volume production
FAQ
What are typical materials that CFS-4EP-LL can deposit?
The official site lists dielectric films such as AlN, SiN and SiO2, transparent conductive films such as ITO and ZnO, and metal films such as Au, Cu, Ti, Al and Ni, among others.
Terms explained
Sputtering Target · Magnetron Sputtering · DC Discharge (Glow Discharge) · Collimator (Collimated Sputtering) · Mean Free Path
Other sputtering equipment
More from Shibaura Mechatronics
- ARTS® (MC-150 series) · Mask cleaning and drying equipment
- CDE series · Dry etching equipment
- FOC300 series FOSB/FOUP cleaning systems · Carrier cleaning equipment
- HSM-1000 · Hybrid bonding equipment
- ICE series · Ashing equipment
- PD-series · Panel-level packaging (FOPLP) equipment
- SC300-FC series · Single-wafer cleaning equipment
- SC300-HT series · Wet etching equipment
Sources
Sputtering equipment
Last updated: November 13, 2026