SB-89010EUVC
An excimer UV cleaner for 150 mm wafers that removes organic contamination from wafer surfaces with 172 nm excimer UV light. It is used for surface cleaning before resist coating.
Maker: JEOL · Official product page
- Free to useQuotes and inquiries are free of charge
- Phone number is optionalYou can send the form without it
How it works
- Fill in the form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
- Semirai forwards your requestSemirai receives your request and forwards it to JEOL. Your details are shared with the maker only with your consent.
- The maker repliesReplies usually arrive within 2–3 business days.
Can't find a product, or unsure which to choose?
Free consultationSpecifications
| Type | Processing in vacuum with Xe excimer UV (wavelength 172 nm) |
|---|---|
| Supported wafers | 150 mm wafers |
| Maximum specimen size | 152.4 mm (W) × 154.2 mm (D) × 60 mm (H) |
| Irradiation time setting | 10 seconds to 99 minutes |
| Ozone generation | 0.0012 mg/min (0.01 ppm around the system) |
Specifications as published by the maker. See the sources below.
Overview
SB-89010EUVC is JEOL's excimer UV cleaner for wafers. Ultraviolet light at 172 nm from a xenon (Xe) excimer removes contamination caused by organic compounds on the wafer surface. JEOL presents it as an option for its electron beam lithography systems.
The main use is cleaning material surfaces before resist coating, and JEOL claims improved adhesion between the material and the resist (with a note that improvement is not guaranteed in every case). An example of removing resist scum (residue) by cleaning before etching is also published.
Because processing takes place in vacuum, ozone generation is extremely small at 0.0012 mg/min, and JEOL lists 0.01 ppm around the system. It handles 150 mm wafers, and the irradiation time can be set from 10 seconds to 99 minutes. The vacuum pump is a diaphragm-type dry vacuum pump.
Key features
- Removal of organic contamination with 172 nm excimer UV
- Very low ozone generation from processing in vacuum
- Supports 150 mm wafers, irradiation time of 10 seconds to 99 minutes
- Offered as an option for electron beam lithography systems
Applications
- Wafer surface cleaning before resist coating
- Removal of resist scum (residue) before etching
FAQ
Does it always improve resist adhesion?
JEOL claims improved adhesion but notes that improvement is not guaranteed in every case.
Terms explained
Other dry cleaning equipment
- OC-2503 / OC-2506 / OC-4012 · Iwasaki Electric
- OC1801C10X · Iwasaki Electric
- HMW-615N-4 · ORC Manufacturing
- ANTARES™ · Tokyo Electron (TEL)
- Certas LEAGA™ · Tokyo Electron (TEL)
- RISE-300 · ULVAC
More from JEOL
- BS series · Vacuum evaporation equipment
- HAXIS LIM · Failure analysis equipment
- IB-19520CCP · Decapsulation and cross-sectioning equipment
- Cross Section Polisher™ IB-19530CP · Decapsulation and cross-sectioning equipment
- IB-19540CP · Decapsulation and cross-sectioning equipment
- JAMP-9510F · Surface analysis instruments (XPS/SIMS)
- JBX-3050MV/S · Electron-beam mask writers
- JBX-3200MVS · Electron-beam mask writers
Sources
Last updated: November 13, 2026