Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Test and reliability equipment

Image sensor test systems4 Japanese makers

Image sensor test systems are automated test equipment for devices that handle light or displays, such as CMOS image sensors and display drivers. For image sensors, the tester is combined with optics that provide uniform illumination to measure sensitivity, dark current, defective pixels and color response pixel by pixel.

7 products listed · 12 related categories
Get quotes (4 companies)Inquire (4 companies)

Tick "Add to bulk request" on the cards to send your request only to the companies and products you choose.

  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
How it works
  1. Fill in one form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to the 4 companies in this category. Your details are shared with them only with your consent.
  3. The companies replyEach company usually replies within 2–3 business days.

AdBanner space for Image sensor test systems is available (one company per category).About advertising →

Advantest

T2000

Advantest's SoC test system configured by combining functional modules. It performs low-cost volume testing of complex consumer devices.

Target devicesSoCs (digital, mixed analog and power, image)
ConfigurationAir-cooled 13 slots to liquid-cooled 52 slots, up to 8,192 ch
Main modules1.6GDME, 8GDM (digital), DSP192A (power), GPWGD (analog)
Main applicationsVolume testing of consumer SoCs
Inter Action

IA-NIR201W

A light source for testing ranging sensors from Inter Action, used to test dToF sensors. It illuminates the sensor with controlled light and switches between 2 wavelengths, 905nm and 910nm.

TypesLight source (for ranging sensor testing)
TargetTesting of dToF sensors
WavelengthSwitchable between 2 wavelengths, 905nm/910nm
Inter Action

IA-OPT576WC

A light source for image sensor testing from Inter Action, used built into the test head. Chromaticity can be corrected at each illuminance level to deliver light with high chromaticity repeatability, and the illumination area is 160mm×150mm.

TypeBuilt into the test head
Illumination area160mm×150mm
Illumination uniformity±2.0%
Chromaticity stabilityLess than +/-0.3%
TelecentricityLess than 1.0 degree
Inter Action

IA-OPT585WXR

A light source for image sensor testing from Inter Action. It is built into the test head and illuminates image sensors with controlled light. Color temperature correction is possible, and the illumination area is 80mm×100mm.

TypeBuilt into the test head
Illumination area80mm×100mm
Uniformity±2.0%
Color temperature variation over full illuminance range±3% or less
TelecentricityLess than 1.0 degree
Inter Action

OPTPATH-4A

A light source for image sensor testing from Inter Action, used for image sensor package (PKG) testing. This handler-mounted type supports parallel testing of 4 DUTs and switching between F-numbers F2, F16 and F24.

TypeHandler-mounted
Illumination area30mm×30mm×4 sites
F-numberSwitchable between F2/F16/F24
Uniformity±2.0% at each F-number
Site-to-site illuminance difference1% or less
Nikon

N-SIS9/8

An illumination system for quality inspection of image sensors formed on wafers. Used with a prober or tester, it lights a wide area uniformly at high illuminance.

SeriesN-SIS9 (built into tester head), N-SIS8 (prober-mounted)
Illumination field sizeN-SIS9: 80 mm × 100 mm / N-SIS8: 120 mm × 120 mm
Illumination uniformityN-SIS9: ± 2.0% or less / N-SIS8: ± 1.5% or less
Main applicationsImage sensor quality inspection
WINTEST

WTS-311NX

A wafer and final test system for high-end CCD and CMOS image sensors. Based on WTS-311, it strengthens logic test support, high-frequency pixel data capture, parallel testing of multiple devices and fast image processing.

Target devicesHigh-end CCD and CMOS image sensors
Devices tested in parallelUp to 4
High-speed digital I/O pins200 MHz, up to 256 pins
Pixel data captureAnalog 80 MHz / digital 200 MHz, up to 16 ch
Per-pin source power meters±60V / ±250mA 24 ch, ±60V / ±25mA 24 ch
Main applicationsWafer test and final test of high-end CCD/CIS

* Specifications are reference values based on public information. Please confirm exact specifications with the maker.

Other test and reliability equipment


Sources


  1. Advantest: T2000 product page
  2. Inter Action: product information page
  3. Inter Action: IA-OPT576WC catalog (PDF)
  4. Inter Action: IA-OPT585WXR catalog (PDF)
  5. Inter Action: OPTPATH-4A catalog (PDF)
  6. Nikon: N-SIS9/8 product page (overview)
  7. Nikon: N-SIS9/8 product page (features)
  8. Nikon: N-SIS9/8 product page (specifications)
  9. WINTEST: WTS-311NX product page

More on this topic


Japanese equipment by category

Image sensor test systems

Last updated: November 13, 2026