Check Valve
A check valve lets a fluid flow in one direction only and closes automatically when flow tries to reverse. It needs no external actuation: forward pressure pushes it open, and reverse pressure, helped by a spring or gravity, pushes it shut. Fabs use check valves to keep one fluid from flowing back into another line.
Also called: non-return valve, one-way valve
Diagram
Where fabs use check valves
In gas systems, check valves stop gases that react dangerously when mixed, such as flammable silane and oxidising gases, from flowing into each other's lines. They protect nitrogen purge lines from being contaminated by process gas flowing back, and they stop backflow from the exhaust side when a pump stops.
In ultrapure water and chemical lines they prevent backflow that could contaminate a clean supply. Valves for semiconductor use are built with electropolished internal surfaces and designs that shed few particles from moving parts.
Limits of a check valve
A check valve opens only when the pressure difference across it exceeds its cracking pressure; below that, nothing flows. This must be chosen to suit the line, especially for low-pressure flows.
A check valve is not a positive shut-off. Even when closed it may leak slightly, and a particle caught in the seat can stop it closing fully. Where flow must be stopped with certainty, such as on hazardous gas lines, it is combined with a shut-off valve, typically a pneumatically operated diaphragm valve.
Japanese companies involved
- Fujikin, CKD and KITZ SCT make valves and fluid control components for semiconductor process gas and vacuum lines.
FAQ
Can a check valve be used to shut off a hazardous gas?
No. It only reduces backflow and may leak slightly when closed. Hazardous gas lines use dedicated shut-off valves, with check valves as an extra layer that prevents mixing between systems.
What is cracking pressure?
The minimum pressure difference between inlet and outlet at which the valve starts to open. Below it the valve stays closed. Lines that run at low pressure need a check valve with a low cracking pressure, or flow will be restricted.
Related pages
Sources
Last updated: November 2, 2026