Fab Infrastructure and Equipment Component Terms Explained
Everything around the process tools: cleanrooms, ultrapure water, gas and chemical supply, vacuum pumps, RF power, robots and automated material handling, and the parts that wear out inside the tools.
Keeping a fab running
A fab is a large factory built around particle-free air, ultrapure water, high-purity gases and chemicals and uninterrupted power. Automated material handling moves wafers in sealed FOUPs between tools, and the tools themselves rely on vacuum pumps, RF generators, mass flow controllers, valves, robots and many consumable parts.
These subsystems rarely make headlines, but they set uptime, contamination levels and running cost, so fabs manage them as carefully as the process tools.
Japanese suppliers
Japanese companies are major suppliers of this layer: Daifuku and Murata Machinery in automated material handling, Ebara in vacuum pumps, HORIBA in mass flow controllers, and Kurita and Organo in ultrapure water, alongside many makers of valves, ceramics and quartz parts.
All fab infrastructure and equipment parts terms (63)
- Abatement System (Scrubber)Equipment that destroys or captures toxic, flammable and greenhouse gases in process tool exhaust before it reaches the factory exhaust.
- Air ShowerA small chamber at the cleanroom entrance that blasts filtered air at people to remove dust from their cleanroom garments before entry.
- Airborne Molecular Contamination (AMC)Contaminants that float in cleanroom air as gas molecules rather than particles, pass straight through particle filters and must be removed chemically.
- Capacitance ManometerA diaphragm vacuum gauge that measures pressure as a change in capacitance, giving accurate readings regardless of gas type.
- Check ValveA valve that lets fluid flow in one direction only and closes automatically against reverse flow.
- Chemical FilterAn air filter that removes airborne molecular contaminants by adsorption or chemical reaction, complementing particle filters such as ULPA.
- CleanroomA room in which airborne particles, temperature, humidity and pressure are tightly controlled so that wafers can be processed without contamination.
- Cleanroom Class (ISO 14644-1)A grade that states how clean cleanroom air is, set by the maximum number of particles of a given size per cubic metre.
- EFEM (Equipment Front End Module)The clean, atmospheric-pressure module between a tool's load ports and its process section, containing a wafer robot, aligner and filter unit.
- Electrostatic Chuck (ESC)A ceramic stage that holds a wafer by electrostatic force in vacuum and controls its temperature through backside helium gas.
- End Effector (Wafer Robot Hand)The part at the tip of a wafer transfer robot that holds and carries the wafer, using vacuum, edge grip, Bernoulli or friction methods.
- Equipment Availability and UtilizationMeasures of how much of the time a tool is able to run and actually runs production; key to the return on expensive fab equipment.
- Fab BuildingThe building that houses a semiconductor fab: a multi-level structure with a cleanroom, a subfab for support equipment and air plenums.
- Fan Filter Unit (FFU)A ceiling module that combines a fan with a HEPA or ULPA filter and blows clean air downwards into a cleanroom.
- FootprintThe floor area a tool occupies in the cleanroom, an important specification because cleanroom space is very costly.
- FOSB (Front Opening Shipping Box)A sealed front-opening box in which wafer makers ship 25 wafers of 300 mm to chip fabs.
- FOUP (Front Opening Unified Pod)A sealed, front-opening plastic carrier that holds 25 wafers of 300 mm and is moved automatically between tools in a fab.
- Gas CabinetA ventilated enclosure that holds cylinders of toxic, flammable or corrosive specialty gases and supplies them safely to process tools.
- Helium Leak TestA leak test that uses helium as a tracer gas and a helium-only mass spectrometer to find where and how much a vacuum system or gas line leaks.
- Hook-up (Tool Utility Connection)The construction work that connects newly installed process tools to the fab's gases, chemicals, water, exhaust and power.
- Ion Exchange ResinResin beads that swap dissolved ions for hydrogen or hydroxide ions; the core material for making the ultrapure water used in chip fabs.
- Ion Pump (Sputter Ion Pump)A capture pump that ionises gas in a magnetic-field discharge and buries it in titanium, giving clean, vibration-free ultra-high vacuum.
- Ionization GaugeA vacuum gauge that ionises residual gas with electrons and calculates pressure from the ion current, used for high and ultra-high vacuum.
- Ionizer (Static Eliminator)A device that generates positive and negative ions to neutralise static charge on surfaces, preventing dust attraction and ESD damage.
- Leak RateThe amount of gas leaking into a vacuum system per second, in Pa·m³/s or mbar·L/s, measured by a rate-of-rise test or a helium leak detector.
- Lift PinA thin rod in a process chamber that raises the wafer off the electrostatic chuck or heater so the transfer robot can pick it up or set it down.
- Load PortThe unit on the front of a process tool that receives a FOUP, opens its door and hands the wafers to the tool without exposing them to room air.
- Manufacturing Execution System (MES)The software that tracks every wafer lot through a fab, tells tools what to run next and records process and quality data.
- Metal ContaminationTrace metals such as iron, copper, nickel or sodium on or in a wafer that degrade device behaviour; fabs control them to around 10¹⁰ atoms/cm².
- Mini-environmentThe practice of enclosing only the small spaces around wafers, such as FOUPs, load ports and EFEMs, and keeping those spaces extremely clean.
- Minor StoppageA stop of a few seconds to a few minutes caused by a small problem rather than a breakdown; individually trivial, collectively a big productivity loss.
- Molecular Flow and Viscous FlowThe two regimes of gas flow in vacuum: molecules moving together through collisions (viscous) or flying independently between walls (molecular).
- OHT (Overhead Hoist Transport)Unmanned vehicles that run on ceiling rails in a cleanroom and lift FOUPs between tools and stockers automatically.
- Oil Diffusion PumpA high-vacuum pump that drives gas molecules downwards with a high-speed jet of oil vapour; simple and cheap but prone to oil backstreaming.
- Overall Equipment Effectiveness (OEE)A single percentage showing how much of a tool's theoretical capacity is actually used to make good product: availability × performance × quality.
- Particle ContaminationSmall particles that land on wafers and cause shorts, opens or pattern defects, and the fab discipline of preventing, detecting and removing them.
- Pass BoxA box with doors on both sides built into a cleanroom wall, used to pass parts and tools between areas without people going through.
- PFC Gas EmissionsGreenhouse-gas emissions from perfluorocarbons and related fluorinated gases used in dry etching and CVD chamber cleaning.
- Pirani GaugeA thermal-conductivity vacuum gauge that infers pressure from how much heat the gas removes from a heated wire, from about 0.1 Pa to near atmosphere.
- Point of Use (POU)The place where gases, chemicals or ultrapure water are actually used, at or just before the process tool; the reference point for quality.
- Process ChamberThe sealed vessel inside a semiconductor tool where a wafer is deposited on, etched or heated; usually under vacuum and grouped around a transfer chamber.
- Pumping SpeedThe volume of gas a vacuum pump removes per unit time, in L/s or m³/h; the effective value at the chamber is limited by pipe conductance.
- RF GeneratorThe power supply that delivers radio-frequency power to a process chamber to create and sustain plasma.
- Roots Pump (Mechanical Booster Pump)An oil-free pump with two figure-eight rotors that gives very high pumping speed in medium vacuum but needs a backing pump behind it.
- Rotary Vane Pump (Oil-Sealed Rotary Pump)An oil-sealed vacuum pump in which an eccentric rotor and vanes trap, compress and expel gas; cheap and simple but largely replaced by dry pumps in fabs.
- SECS/GEMA family of SEMI standards that lets process tools exchange data and commands with the factory host computer, such as the MES.
- SEMI E84 (Parallel I/O Handoff)The SEMI standard for the signal exchange that lets overhead transport vehicles hand FOUPs safely to and from equipment load ports.
- SEMI E87 (Carrier Management Standard)The SEMI standard for how equipment accepts, verifies and manages wafer carriers, checking carrier ID and slot map against the host.
- SEMI E90 (Substrate Tracking)The SEMI standard for tracking where each wafer is inside a tool and what processing it has received, and reporting this to the fab host.
- SEMI S2SEMI's environmental, health and safety guideline for semiconductor manufacturing equipment, the de facto global standard for tool safety.
- SMIF PodA sealed, bottom-opening container that keeps wafers or photomasks isolated from room air; used mainly for 200 mm and smaller wafers.
- Specialty GasHigh-purity gases of specific composition used in chip processes, such as silane, WF₆, CF₄, arsine and NF₃, as distinct from bulk nitrogen or argon.
- Stocker (Automated Wafer Storage)An automated storage system that holds FOUPs of work-in-process wafers and releases them to overhead transport when needed.
- SusceptorThe plate that holds wafers in epitaxy and MOCVD reactors, absorbing heat from lamps or induction coils and passing it evenly to the wafer.
- ThroughputHow much a tool or fab can process in a given time, usually wafers per hour (WPH) for front-end tools.
- Turbo Molecular Pump (TMP)A vacuum pump whose fast-spinning bladed rotor knocks gas molecules towards the exhaust, giving high vacuum in process and analysis tools.
- Ultimate PressureThe lowest pressure a pump or chamber settles at after long pumping with no gas admitted, set by the balance of gas load and pumping speed.
- Ultra-High Vacuum (UHV)Vacuum below about 10⁻⁵ Pa, typically used at 10⁻⁷ to 10⁻⁹ Pa, needed to keep surfaces clean for MBE, surface analysis and electron guns.
- Ultrapure Water (UPW)Water purified far beyond ordinary deionised water, used in large volumes for wafer cleaning, rinsing and chemical dilution.
- Uninterruptible Power Supply (UPS)A power system that keeps equipment running from batteries or other stored energy during outages and sudden voltage drops.
- VacuumA space filled with gas at less than atmospheric pressure; most deposition, etching, implantation and EUV exposure steps run in vacuum chambers.
- Work in Process (WIP)Products started on a production line but not yet finished; in a fab, the total number of wafers part-way through processing.
- Yttria Coating (Plasma-Resistant Coating)A layer of yttrium oxide sprayed onto chamber parts so they erode slowly in fluorine and chlorine plasmas and shed fewer particles.
Related pages
Glossary
Fab infrastructure and equipment parts terms
- Abatement System (Scrubber)
- Air Shower
- Airborne Molecular Contamination (AMC)
- Capacitance Manometer
- Check Valve
- Chemical Filter
- Cleanroom
- Cleanroom Class (ISO 14644-1)
- EFEM (Equipment Front End Module)
- Electrostatic Chuck (ESC)
- End Effector (Wafer Robot Hand)
- Equipment Availability and Utilization
- Fab Building
- Fan Filter Unit (FFU)
- Footprint
- FOSB (Front Opening Shipping Box)
- FOUP (Front Opening Unified Pod)
- Gas Cabinet
- Helium Leak Test
- Hook-up (Tool Utility Connection)
- Ion Exchange Resin
- Ion Pump (Sputter Ion Pump)
- Ionization Gauge
- Ionizer (Static Eliminator)
- Leak Rate
- Lift Pin
- Load Port
- Manufacturing Execution System (MES)
- Metal Contamination
- Mini-environment
- Minor Stoppage
- Molecular Flow and Viscous Flow
- OHT (Overhead Hoist Transport)
- Oil Diffusion Pump
- Overall Equipment Effectiveness (OEE)
- Particle Contamination
- Pass Box
- PFC Gas Emissions
- Pirani Gauge
- Point of Use (POU)
- Process Chamber
- Pumping Speed
- RF Generator
- Roots Pump (Mechanical Booster Pump)
- Rotary Vane Pump (Oil-Sealed Rotary Pump)
- SECS/GEM
- SEMI E84 (Parallel I/O Handoff)
- SEMI E87 (Carrier Management Standard)
- SEMI E90 (Substrate Tracking)
- SEMI S2
- SMIF Pod
- Specialty Gas
- Stocker (Automated Wafer Storage)
- Susceptor
- Throughput
- Turbo Molecular Pump (TMP)
- Ultimate Pressure
- Ultra-High Vacuum (UHV)
- Ultrapure Water (UPW)
- Uninterruptible Power Supply (UPS)
- Vacuum
- Work in Process (WIP)
- Yttria Coating (Plasma-Resistant Coating)
Last updated: November 1, 2026