Fab Building
A fab building is the structure that houses a semiconductor fab's production equipment. Unlike an ordinary factory, it is a multi-level building with a cleanroom floor, a subfab below for support equipment, and plenums that carry recirculating air, all built to be very stiff so that vibration does not disturb precise tools.
Also called: fab shell, semiconductor factory building
Diagram
Inside the building
A typical fab stacks several levels. Above the cleanroom is the supply plenum, where air-handling equipment and fan filter units push clean air down. The cleanroom level holds the process tools on a perforated floor through which air flows downwards. Below is the subfab, with vacuum pumps, abatement units, power supplies and chemical delivery, connected to the tools through the floor. Utility plants for ultrapure water, gases and electricity sit at the base or in separate buildings.
Lithography and other precise tools need a quiet floor, so the cleanroom is often built on a thick concrete waffle slab and the structure is designed for high rigidity. A fab site also includes utility buildings, wastewater treatment and offices.
From construction to production
Building the shell is the first large stage of a fab project. For a large leading-edge fab it can take a year or more from groundbreaking to completion. Tool move-in, hook-up to utilities and process start-up follow.
Decisions made at this stage last for decades. Floor load capacity, ceiling height and spare utility capacity decide whether the fab can later take bigger or heavier tools and add capacity, and so strongly affect the return on the investment.
Japanese companies involved
- Kajima Corporation acted as a builder for Rapidus's IIM-1 fab in Hokkaido, which was completed for 2 nm logic pilot production.
- Airtech Japan supplies cleanroom equipment and fan filter units used inside fab buildings.
- Rapidus · Leading-edge logic foundry (2 nm, in development)
- Airtech Japan · Cleanrooms, clean benches, air showers and FFUs
- Shinryo Corporation · Precision cleaning of equipment parts and silicon wafer reclaim
FAQ
What is a subfab?
The level directly below the cleanroom, where support equipment for each tool is placed: dry pumps, abatement, RF and power supplies, chillers and chemical or gas distribution. Keeping this equipment out of the cleanroom saves expensive clean floor space and reduces vibration and heat near the tools.
Why must the fab floor resist vibration?
Exposure tools and metrology tools position wafers with nanometre-level precision. Vibration from traffic, pumps or air handling would blur patterns and measurements, so the floor is massive and stiff and vibrating equipment is isolated from it.
Related pages
Sources
Last updated: November 1, 2026