Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Glossary · Fab infrastructure and equipment parts

FOUP (Front Opening Unified Pod)

A FOUP (front opening unified pod) is a sealed carrier that holds twenty-five 300 mm wafers at a 10 mm pitch for transport and storage inside a fab. Its size and interfaces are set by the SEMI E47.1 standard, so carriers, process tools and transport systems from different makers fit together.

Also called: front opening unified pod, wafer carrier

Diagram


FOUP specifications: capacity, standard, top flange, hand-off and purge

Click anywhere to zoom in there. Scroll to zoom, drag to move

Short for Front Opening Unified Pod. FOSBs are used between factories.

How a FOUP is used


Overhead hoist transport (OHT) vehicles grip the flange on top of the FOUP and carry it along ceiling rails to the load port of the next tool. When the FOUP docks, the load port unlatches its front door and pulls it inwards together with the tool-side wall, so the wafers move into the tool without meeting room air. No operator touches the wafers along the way.

Ports on the bottom of the FOUP allow nitrogen purging. Filling the pod with nitrogen keeps out oxygen and moisture while wafers wait between steps, which matters for copper interconnect and other surfaces that oxidise easily.

Design and materials


FOUPs are moulded from clean, static-dissipative engineered plastics that release little gas or dust. The slots that hold each wafer must be dimensionally precise so that robots can pick wafers reliably, and the door seal, latch and kinematic coupling on the base must match the load port exactly.

The FOUP replaced the open cassette and the bottom-opening SMIF pod used for 200 mm wafers. For shipping new wafers between companies, a related container, the FOSB, is used instead.

Japanese companies involved


  • Shin-Etsu Polymer and Miraial make FOUPs and other wafer containers.
  • Daifuku and Murata Machinery supply the OHT vehicles and stockers that move and store FOUPs in 300 mm fabs.

FAQ


How many wafers does a FOUP hold?

The standard FOUP holds 25 wafers of 300 mm. Smaller-lot versions exist, but 25 wafers is also the usual lot size that a fab's manufacturing execution system tracks as one unit.

What is the difference between a FOUP and a FOSB?

A FOUP is used inside a fab and is built for repeated automatic handling, with a top flange for overhead transport. A FOSB (front opening shipping box) is used to ship wafers from the wafer maker to the fab and has a handle on top and extra protection against shock in transit.

Related pages


Sources


  1. Entegris: Wafer processing carriers

More on this topic


Fab infrastructure and equipment parts terms

Last updated: November 1, 2026