FOSB (Front Opening Shipping Box)
A FOSB (front opening shipping box) is a sealed container in which wafer manufacturers ship 300 mm wafers to device makers. Like a FOUP it opens at the front, holds 25 wafers and can sit on a standard load port, but it is designed for transport between factories rather than automated handling inside a fab.
Also called: front opening shipping box, wafer shipping box
Diagram
FOSB vs FOUP
A FOUP has a robotic flange on top so that overhead hoist vehicles can lift it, and it is built to survive thousands of automated cycles. A FOSB has a handle instead, because it is carried by people and packed into cartons. Its design focuses on holding wafers firmly against vibration and shock on trucks and aircraft, at a cost suited to a shipping container.
The mechanical features of the FOSB are defined by the SEMI M31 standard, which keeps it compatible with the front-opening interface of fab load ports.
How FOSBs are used
FOSBs are moulded from clean, static-dissipative plastics with low outgassing. To stop native oxide growth and haze on the wafer surface during shipping, they may be purged with nitrogen or sealed in vacuum bags. They are used for polished wafers and also for higher-value epitaxial and SOI wafers.
At the receiving fab, wafers are either processed directly from the FOSB on a load port or transferred into FOUPs with a dedicated sorter, which limits particle risk. Empty FOSBs are usually returned to the wafer maker, cleaned, inspected and reused.
Japanese companies involved
- Miraial and Shin-Etsu Polymer make FOSBs and other wafer containers.
- Japanese wafer makers such as SUMCO ship 300 mm wafers to chipmakers in front-opening shipping boxes.
- Miraial · FOUPs, FOSBs and wafer containers
- Shin-Etsu Polymer · FOUPs, FOSBs and reticle pods
- SUMCO · Silicon wafers
FAQ
Can wafers be processed straight from a FOSB?
Yes, in principle. A FOSB follows the same front-opening interface as a FOUP, so it can be placed on a load port. Many fabs nevertheless move the wafers into their own FOUPs at receiving, so that the rest of the line handles only one carrier type.
Why are FOSBs returned and reused?
They are made of high-purity plastic to tight dimensions, so throwing them away after one trip would be wasteful. After return they are cleaned and inspected for damage and contamination before being filled with wafers again.
Related pages
- FOUP (Front Opening Unified Pod)
- Load Port
- EFEM (Equipment Front End Module)
- Particle Contamination
- Silicon Wafer
- Silicon Wafer Manufacturing
- Epitaxial Wafer (Epi Wafer)
- SMIF Pod
- Automated material handling systems (AMHS)
- Miraial 300mm FOUP
- Shin-Etsu Polymer FOUP300EX
- Murata Machinery (Muratec) HTC
- Murata Machinery (Muratec) MDS
Sources
Last updated: November 13, 2026