Reclaim Wafer
A reclaim wafer is a used silicon wafer whose films and patterns have been stripped, then repolished and cleaned so it can be used again. Reclaimed wafers are not used for product. They serve as test wafers for tool qualification, particle monitoring and film-thickness checks, and as dummy wafers in batch tools.
Also called: reclaimed wafer, recycled test wafer
Diagram
Why fabs use so many test wafers
Fabs consume large numbers of non-product wafers every day. They check cleanliness after maintenance, calibrate deposition and etch rates, verify that wafer handling works, and fill empty slots in batch furnaces so that gas flow and temperature stay uniform. Using new prime wafers for all of this would be costly, so reclaimed wafers are an economical alternative and also reduce waste.
The reclaim process
Reclaiming has three steps. First, films are removed by acid or alkaline chemicals, or by grinding. Second, the wafer is polished to remove pattern traces and damaged layers. Third, it is cleaned and inspected. Each cycle thins the wafer by a few to a few tens of micrometres, so it can be reclaimed several times before reaching the minimum thickness. Wafers that are too thin are scrapped as silicon material.
Quality grades follow use. Particle monitor wafers need high cleanliness and flatness, while dummy wafers for furnace slots only need to be free of visible damage and contamination. Chipmakers buy by grade and set rules on which processes a wafer may pass through, to avoid carrying metal contamination between tools.
Who does it
Reclaim is mostly done by specialist service companies rather than prime wafer makers. Demand tracks fab activity, so the business moves with the semiconductor cycle.
Japanese companies involved
- RS Technologies is a specialist in reclaiming silicon test wafers for fabs and also supplies prime wafers.
- Mimasu Semiconductor Industry provides contract silicon wafer processing and reclaimed wafers.
- RS Technologies · Reclaimed silicon wafers and prime wafers
- Mimasu Semiconductor Industry · Contract silicon wafer processing and reclaimed wafers
- SUMCO · Silicon wafers
- SpeedFam · Wafer polishing and lapping equipment
- Hamai Industries · Lapping and polishing machines for wafers
FAQ
Why can't a reclaimed wafer be used for products?
Product wafers must meet tight specifications for thickness, flatness, defects and crystal history from the original wafer supplier. A reclaimed wafer is thinner, has been through unknown processes, and cannot guarantee those properties.
Are wafers with copper on them reclaimed the same way?
Wafers that have seen copper or other fast-diffusing metals are usually handled in separate lines or excluded, because metal that has diffused into the bulk cannot be removed by surface stripping and could contaminate other fabs.
Related pages
Sources
Last updated: November 13, 2026