Silicon Wafer Manufacturing Terms Explained
How single-crystal silicon is grown, sliced, polished and checked before any chip is built on it, and the compound and engineered substrates used next to plain silicon.
From ingot to polished wafer
Most chips start as a 300 mm silicon wafer cut from an ingot grown by the Czochralski method. The ingot is ground, sliced with a wire saw, lapped, etched and polished until the surface is flat to the nanometre scale. Epitaxial layers, SOI structures and annealed wafers add engineered layers on top for specific devices.
Japanese suppliers are central to this stage. Shin-Etsu Chemical and SUMCO are the two largest silicon wafer makers, and Japanese companies also make much of the grinding, slicing and polishing equipment used to produce the wafers.
Beyond silicon
Power and RF devices increasingly use silicon carbide (SiC) and gallium nitride (GaN). These materials are harder to grow and process, so substrate quality and defect density are recurring themes in this section.
All wafers and substrates terms (37)
- 200mm Wafer (8-inch Wafer)A silicon wafer 200 mm (about 8 inches) in diameter and 725 µm thick, still the workhorse for power, MEMS, sensors and analog chips.
- 300mm Wafer (12-inch Wafer)A silicon wafer 300 mm (about 12 inches) in diameter and 775 µm thick, the standard size for leading-edge logic and memory.
- Annealed WaferA polished silicon wafer heat-treated at about 1,200 °C in hydrogen or argon to remove near-surface COP defects and create a defect-free layer.
- Bulk SiliconAn ordinary wafer made entirely of single-crystal silicon, as opposed to SOI; also the interior of a material as opposed to its surface.
- CleavageThe tendency of a crystal to split cleanly along particular crystal planes; used to make cross-sections and laser diode facets.
- Czochralski Process (CZ Method)The standard method for growing single-crystal silicon ingots by slowly pulling a rotating seed crystal out of molten silicon in a quartz crucible.
- DimpleA shallow, dish-shaped depression on a surface: a local defect on polished wafers, or a dish ground into a TEM sample to thin it.
- Epitaxial Wafer (Epi Wafer)A polished silicon wafer with a single-crystal silicon layer, a few to tens of micrometres thick, grown on top with its own doping.
- Final PolishingThe last polishing step in silicon wafer manufacturing, removing under 1 µm to give an atomically smooth mirror surface.
- Float Zone Process (FZ Method)A crucible-free method that grows very pure, low-oxygen single-crystal silicon by moving a molten zone along a polysilicon rod.
- GaN-on-Silicon (GaN-on-Si)A substrate technology that grows gallium nitride layers on inexpensive, large-diameter silicon wafers, mainly for GaN power transistors.
- GetteringTechniques that pull metal impurities such as iron, copper and nickel away from the device layer of a silicon wafer and trap them where they do no harm.
- Internal Thermal Oxidation (ITOX)A high-temperature oxidation step that thickens and improves the buried oxide of SIMOX SOI wafers from the inside.
- Interstitial Oxygen (Oi)Oxygen dissolved in the interstitial sites of CZ silicon from the quartz crucible; it helps gettering and wafer strength but can also cause problems.
- Kerf LossThe width of material turned into dust when an ingot is cut; for wafer slicing it is comparable to the wafer thickness itself.
- LappingA flattening process in which loose abrasive grains roll between a plate and the wafer, removing saw marks and thickness variation after slicing.
- Laser Slicing / Laser Lift-offA method that forms a modified layer inside an ingot with a focused laser and splits a wafer off along it, with almost no kerf loss.
- Magnetic Czochralski Method (MCZ)A Czochralski crystal growth method that applies a strong magnetic field to the silicon melt to suppress convection and control oxygen.
- MicroroughnessAtomic- to nanometre-scale roughness of a wafer surface, around 0.1 nm RMS on polished silicon, measured by AFM or light scattering.
- NanotopographyShallow, gentle surface waviness on a wafer, with wavelengths of about 0.2-20 mm and heights of a few to tens of nanometres.
- Orientation Flat / NotchMarks on the wafer edge, a straight flat or a small V-shaped notch, that show the crystal orientation so tools can align the wafer.
- PVT (Physical Vapour Transport) MethodA crystal growth method in which source material sublimates at over 2,000 °C and the vapour recrystallises on a cooler seed; the standard way to grow SiC.
- Reclaim WaferA used wafer that has had its films and patterns stripped and been repolished, so it can be used again as a test or dummy wafer.
- Sapphire SubstrateA substrate cut from single-crystal aluminium oxide, the most widely used growth substrate for GaN-based blue and white LEDs.
- Seed CrystalA small single crystal used as a template; its atomic arrangement and orientation are copied by the crystal grown from it.
- SiC Wafer (Silicon Carbide Substrate)A single-crystal silicon carbide substrate for power devices, grown by sublimation rather than from a melt, which makes it slow and costly to produce.
- Silicon IngotThe cylindrical single crystal of silicon from which wafers are sliced; a 300 mm ingot is about two metres long and weighs several hundred kilograms.
- Silicon WaferA thin, mirror-polished disc of single-crystal silicon on which chips are built; 300 mm is the standard size for leading-edge production.
- Silicon Wafer ManufacturingThe chain of steps that turns polysilicon into finished, mirror-polished single-crystal wafers before any circuit is built on them.
- Smart CutA layer transfer technology that splits a hydrogen-implanted wafer to move a thin single-crystal layer onto another wafer; the main way to make SOI.
- SubstrateThe base on which films are formed, devices are built or chips are mounted; either the wafer or the package substrate, depending on context.
- Swirl DefectA spiral pattern of microscopic crystal defects revealed when a silicon wafer is selectively etched, formed from excess point defects.
- Temperature Gradient MethodA family of crystal growth methods that grow a crystal from the cooler side of a controlled temperature difference, such as VGF and SiC solution growth.
- Vertical Bridgman Method (VB)A crystal growth method that solidifies a melt in a vertical crucible from a seed at the bottom; used for GaAs and InP substrates.
- Wafer Bow and WarpMeasures of how much a wafer curves when it is not clamped: bow is the signed shift of its centre, warp the total height range of its median surface.
- Wafer Flatness (TTV / SFQR / GBIR)A set of metrics describing how even a wafer's surface height is, from whole-wafer thickness variation (GBIR/TTV) to site flatness (SFQR).
- Wire SawA machine that slices an ingot into hundreds of wafers at once by pressing it into a web of fine moving wire carrying abrasive.
Wafers and substrates comparisons
Related pages
Glossary
Wafers and substrates terms
- 200mm Wafer (8-inch Wafer)
- 300mm Wafer (12-inch Wafer)
- Annealed Wafer
- Bulk Silicon
- Cleavage
- Czochralski Process (CZ Method)
- Dimple
- Epitaxial Wafer (Epi Wafer)
- Final Polishing
- Float Zone Process (FZ Method)
- GaN-on-Silicon (GaN-on-Si)
- Gettering
- Internal Thermal Oxidation (ITOX)
- Interstitial Oxygen (Oi)
- Kerf Loss
- Lapping
- Laser Slicing / Laser Lift-off
- Magnetic Czochralski Method (MCZ)
- Microroughness
- Nanotopography
- Orientation Flat / Notch
- PVT (Physical Vapour Transport) Method
- Reclaim Wafer
- Sapphire Substrate
- Seed Crystal
- SiC Wafer (Silicon Carbide Substrate)
- Silicon Ingot
- Silicon Wafer
- Silicon Wafer Manufacturing
- Smart Cut
- Substrate
- Swirl Defect
- Temperature Gradient Method
- Vertical Bridgman Method (VB)
- Wafer Bow and Warp
- Wafer Flatness (TTV / SFQR / GBIR)
- Wire Saw
- Czochralski vs float zone: what is the difference?
- SOI vs bulk silicon: what is the difference?
- Epitaxial wafer vs polished wafer: what is the difference?
Last updated: November 1, 2026