Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Front-end equipment

Ashing equipment5 Japanese makers

Ashing equipment removes photoresist with oxygen radicals from a plasma, which break the resist down into carbon dioxide and water that are pumped away. No liquid chemicals are used, so there is no chemical waste, and many wafers can be processed efficiently.

6 products listed · 12 related categories
Get quotes (7 companies)Inquire (7 companies)

Tick "Add to bulk request" on the cards to send your request only to the companies and products you choose.

  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
How it works
  1. Fill in one form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to the 7 companies in this category. Your details are shared with them only with your consent.
  3. The companies replyEach company usually replies within 2–3 business days.

AdBanner space for Ashing equipment is available (one company per category).About advertising →

Plasma-Therm Japan

Odyssey HDRF™

Plasma-Therm's system for resist stripping, polymer removal and sacrificial layer etching by downstream processing with distributed ICP sources. It handles substrates up to 200mm.

TypeDownstream processing with distributed ICP sources (13.56 MHz), low-temperature O2- and F-based processes
Supported substratesUp to 200mm
Process temperature50 °C to 250 °C
ConfigurationSingle chamber (manual load), dual load port / dual process chamber, cluster on a VERSALINE® handler
Shibaura Mechatronics

ICE series

A low-temperature asher for resist removal after high-dose ion implantation (HDIS). An electrostatic chuck with a cooling mechanism lets it also process thin wafers with protective material attached.

Wafer size200 / 300 mm
Main applicationsHDIS (resist strip after high-dose implantation)
CapacityAshing rate of 1.5 μm/min or more
Key featureWafer temperature of 100 °C or less
Showa Shinku

SPE-2136A

A plasma cleaner from Showa Shinku. It performs descum, surface modification and ashing on φ4 to φ6-inch wafers, and has an automatic transfer mechanism and a process chamber that treats 2 wafers at the same time.

Supported wafersφ4 to φ6 inch
Processing method2 wafers processed at the same time, C-to-C automatic transfer
DistributionWithin-wafer ±10% or less (Si substrate)
Main applicationsDescum, surface modification and ashing
Installation dimensionsBody: W1,340 mm × D1,945 mm × H1,870 mm
ULVAC

Luminous NA series

ULVAC's ashing system that works with any wafer size. It covers everything from next-generation wafer processes to WLP.

TypePlasma ashing
Wafer sizeAny wafer size (panel model up to 600 mm square)
ConfigurationWafer model / panel model
Main applicationsResist stripping after ion implantation, polymer removal, descum
Yamato Material

YSP1000B

A barrel-type plasma ashing system from Yamato Material with a coaxial electrode and a quartz barrel. It is used for resist ashing on silicon and compound semiconductor wafers.

TypeCylindrical barrel type with coaxial structure (quartz chamber)
Supported processesAshing and etching of small-diameter wafers
RF output1000 W (max), 13.56 MHz crystal oscillator
Chamber dimensions (inside)Φ300 × L500 mm
Process gases2 lines (oxygen, nitrogen)
Yamato Material

YSP650W

A plasma ashing system from Yamato Material with coaxial electrodes and a vertical barrel structure. A robot transfers wafers from wafer carriers to a quartz boat, and it processes 50 wafers at once.

TypeVertical barrel structure with coaxial electrodes (quartz chamber)
Wafers per batch50 wafers (2 carriers)
Supported wafers6 inch, 8 inch (4 and 5 inch optional)
RF output1000 W (max), 13.56 MHz
Supported processesResist ashing, polyimide etching, descum and more

* Specifications are reference values based on public information. Please confirm exact specifications with the maker.

Other front-end equipment


Sources


  1. Plasma-Therm: Odyssey HDRF™ product page (English)
  2. Shibaura Mechatronics: ICE series low-temperature asher product page
  3. Showa Shinku: SPE-2136A product page
  4. ULVAC: Luminous NA series product page
  5. Yamato Material: YSP1000B plasma ashing system product page
  6. Yamato Material: YSP650W plasma ashing system product page

More on this topic


Japanese equipment by category

Ashing equipment

Last updated: November 13, 2026