Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Front-end equipment

Laser annealing equipment4 Japanese makers

Laser annealing equipment heats the wafer surface with laser light, such as UV excimer or green lasers, for extremely short times. Only the surface is heated, which keeps the thermal budget very low.

6 products listed · 12 related categories
Get quotes (4 companies)Inquire (4 companies)

Tick "Add to bulk request" on the cards to send your request only to the companies and products you choose.

  • Free to useQuotes and inquiries are free of charge
  • Phone number is optionalYou can send the form without it
How it works
  1. Fill in one form and send itEnter your company name, contact name, email address and request. Phone, quantity and timing are optional.
  2. Semirai forwards your requestSemirai receives your request and forwards it to the 4 companies in this category. Your details are shared with them only with your consent.
  3. The companies replyEach company usually replies within 2–3 business days.

AdBanner space for Laser annealing equipment is available (one company per category).About advertising →

Sakaguchi Electric Heaters

ExLASER®

A multifunction laser planar flash heating system from Sakaguchi Electric Heaters. It can heat a 2-inch substrate uniformly in 1 shot, and listed application examples include wafer annealing and substrate heating in MBE systems.

TypeLaser planar flash heating (direct type)
Standard specificationEXL-CT-010-DS55: laser output up to 1kW, wavelength 808nm
Heating area□55mm (homogenizer, uniformity ±5%)
Main applicationsSubstrate heating in MBE systems, wafer annealing
SCREEN Holdings

LA-3100

SCREEN's millisecond anneal system that heats and cools the wafer surface with flashes of a few milliseconds from xenon flash lamps. It achieves high dopant activation with a low thermal budget.

Heating methodXenon flash lamps (millisecond)
AtmosphereSingle-wafer processing, low-oxygen atmosphere
Key featureMeasures wafer temperature during flash heating
Main applicationsDopant activation in source/drain
Sumitomo Heavy Industries Material Solutions (formerly SMIT)

LT-3100

A nanosecond laser annealing system that melt-anneals only the top surface of the wafer on a sub-microsecond scale using proprietary UV laser technology. It uses a step-and-repeat method.

TypeMelt annealing with a UV laser (step-and-repeat)
Heating and coolingRapid temperature rise and fall in 200ns or less
Supported wafersAny wafer size, including small-diameter wafers and ultra-thin wafers 40µm thick or less
Main usesDopant activation, thin-film crystallization, defect repair, surface smoothing, processing for 3D packaging
Sumitomo Heavy Industries Material Solutions (formerly SMIT)

QA-3000

A laser anneal system that precisely controls thermal budget with microsecond UV laser annealing technology. It applies to silicon and also to wide-bandgap materials such as SiC and GaN.

TypeMicrosecond UV laser annealing (step-and-repeat irradiation)
Target materialsSilicon, wide-bandgap materials such as SiC and GaN
Main usesActivation, crystallization, curing
Related modelsLT-3100 (earlier model; QA-3000 has a much smaller footprint)
Sumitomo Heavy Industries

SWA-20US

Sumitomo Heavy Industries' laser annealing system for next-generation power devices (SWA “UV” Laser series). With a UV-YAG laser and the high-speed OPTSWING scanning method, it handles tasks such as SiC ohmic contact formation.

LaserUV-YAG laser 10 W
Beam size (FWHM)φ100 μm
Supported wafersSmall pieces to φ200 mm (8 in)
Process atmosphereN2 / Air (room temperature process)
Main applicationsSiC ohmic contact formation, activation, etc.
Sumitomo Heavy Industries

SWA “Green/Hybrid” Laser series

Sumitomo Heavy Industries' laser annealing system. Its hybrid configuration carries a solid-state laser and a long-wavelength laser, and supports deep activation of up to 7 μm with the company's proprietary double-pulse process.

SeriesSWA-20GD / SWA-20GDA / SWA-90GD / SWA-90GDA / SWA-93GD / SWA-93GDA
Supported wafersModels for up to φ200 mm (8 in) and for φ300 mm (12 in)
Beam size (FWHM)Width 0.25 mm / 0.3 mm, length 2.5 mm
Process atmosphereN2 / Air (room temperature process)
Wafer handlingAutomatic (over 70 μm thick)

* Specifications are reference values based on public information. Please confirm exact specifications with the maker.

Other front-end equipment


Sources


  1. Sakaguchi Electric Heaters: ExLASER® product page
  2. SCREEN: LA-3100 product page
  3. Sumitomo Heavy Industries Material Solutions: LT-3100 product page
  4. Sumitomo Heavy Industries Material Solutions: QA-3000 product page
  5. Sumitomo Heavy Industries Mechatronics Division: SWA “UV” Laser series product page
  6. Sumitomo Heavy Industries Mechatronics Division: SWA “Green/Hybrid” Laser series product page

More on this topic


Japanese equipment by category

Laser annealing equipment

Last updated: November 13, 2026