Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Glossary · CMP and cleaning

Buff Polishing

Buff polishing is a finishing method in which a soft buff of cloth, felt or non-woven material carrying a polishing compound is rotated against a surface to make it smooth and glossy. In the semiconductor field it refers to a light finishing polish after the main CMP step, and to the surface finishing of equipment parts such as vacuum chambers and piping.

Also called: buffing, buff clean

Diagram


Uses of buff polishing: finish polish after CMP and inner surfaces of equipment parts

Click anywhere to zoom in there. Scroll to zoom, drag to move

Little material is removed; the aim is to condition the surface.

How buffing differs from grinding and CMP


Conventional buffing works through progressively finer compounds. Unlike a grinding wheel, the buff is soft and conforms to the shape of the part, so it smooths small irregularities and brings up a shine rather than creating precise dimensions or flatness. Its goal is lower surface roughness, not removal of a defined thickness.

Silicon wafer makers flatten wafers by lapping and then finish them by double-side and single-side mirror polishing. These steps are normally called polishing, not buffing.

Buffing in CMP tools and on equipment parts


Some CMP tools add a short buff step after the main polish, using a soft pad with a mild slurry or chemical solution. It removes fine scratches and slurry particles stuck to the surface, making the following clean more effective. It is one kind of final polish.

For equipment parts, the inner surfaces of vacuum chambers, piping and chemical-handling parts are buffed smooth so that particles collect less and the surface releases less gas. Where higher smoothness and cleanliness are needed, as in ultra-high-purity gas lines, buffing is followed by electropolishing (EP), which smooths the surface further and forms a passive film.

Japanese companies involved


  • Ebara builds CMP systems, and Okamoto Machine Tool Works makes wafer polishers and grinders.
  • Fujimi Incorporated supplies polishing compounds and CMP slurries.

FAQ


What is the difference between buff polishing and CMP?

CMP combines chemical reaction and abrasive action to planarise the wafer precisely to a target thickness. Buff polishing uses a soft material to smooth fine roughness and is not meant to create flatness. Inside a CMP tool, a short light finishing step after the main polish is sometimes called a buff.

How are buffing and electropolishing combined?

Buffing smooths the surface mechanically, while electropolishing dissolves the high points electrochemically. For high-purity gas piping, parts are usually buffed first to reduce roughness and then electropolished to obtain a smoother, cleaner surface that holds less contamination.

Related pages


Sources


  1. Journal of the Surface Finishing Society of Japan: Basics and trends in buff polishing, tools and equipment (Japanese, PDF)

More on this topic


CMP and cleaning terms

Last updated: November 13, 2026