CMP and Wafer Cleaning Terms Explained
How wafers are kept flat and clean between process steps: chemical mechanical planarization, slurries and pads, and the wet and dry cleaning steps that remove particles and residues.
Flat and clean
CMP polishes the wafer with a rotating pad and a chemically active slurry so that the next layer starts on a flat surface. It is used for shallow trench isolation, tungsten plugs and every copper wiring level. Dishing, erosion and defects are the main things engineers watch.
Cleaning is the most frequently repeated step in the fab. RCA-type wet cleans, single-wafer spin cleaning, megasonic cleaning and drying methods are chosen to remove particles, metals and organics without damaging fine patterns.
Japanese suppliers
Ebara makes CMP systems, SCREEN and Tokyo Electron lead in wafer cleaning equipment, and Japanese companies supply slurries, high-purity chemicals and cleaning consumables.
All cmp and cleaning terms (31)
- AbrasiveHard fine particles that remove material in polishing and grinding, used in CMP slurries, wafer polishing, grinding wheels and dicing blades.
- Aerosol Cleaning (Cryogenic Aerosol)A dry cleaning method that blasts the wafer with frozen argon or nitrogen particles to knock off contaminant particles.
- BHF (Buffered Hydrofluoric Acid)A mixture of hydrofluoric acid and ammonium fluoride used for stable, selective wet etching of silicon oxide.
- Buff PolishingFinishing a surface smooth and glossy with a soft cloth or felt buff carrying a polishing compound; used after main CMP and on equipment parts.
- Ceria SlurryA CMP slurry using cerium oxide particles, which bond chemically with oxide to polish it fast and can stop selectively on nitride.
- CMP (Chemical Mechanical Polishing)A process that flattens the wafer surface to nanometre level by combining a chemical slurry with mechanical polishing on a rotating pad.
- CMP Equipment (Polisher)Production equipment that performs chemical mechanical polishing, combining platens, polishing heads, slurry delivery, pad conditioning, endpoint detection and post-polish cleaning.
- CMP SlurryThe polishing liquid used in chemical mechanical polishing: nanoscale abrasive particles suspended in a tailored chemical solution that softens or dissolves the film being removed.
- Colloidal SilicaA stable liquid dispersion of round silica nanoparticles, used as the abrasive in CMP slurries and for final polishing of silicon wafers.
- Copper Recess (for Hybrid Bonding)The small, deliberate depth by which copper pads sit below the surrounding dielectric before hybrid bonding, set by CMP.
- Cross ContaminationContamination carried from one process or product into another through tools, carriers, people, air or chemicals.
- Dishing (CMP)A CMP defect in which the centre of a wide metal line is over-polished and sinks into a dish-shaped depression.
- Fixed Abrasive PolishingPolishing with abrasive grains bonded into the pad or wheel, while only abrasive-free chemical solution or water is supplied.
- Fumed SilicaA fine silica powder made in a hydrogen-oxygen flame, whose primary particles fuse into chain-like aggregates; used as a CMP abrasive and thickener.
- Functional WaterUltrapure water with small amounts of dissolved gas or chemicals, such as hydrogen, ozone or carbon dioxide, used for cleaning with less chemical use.
- Glazing (Pad and Wheel)The smoothing and clogging of a polishing pad or grinding wheel surface with use, which lowers its removal capability.
- Hydrophilicity and HydrophobicityHow readily a surface is wetted by water, expressed by the contact angle of a water droplet; it changes with surface treatment and matters for cleaning, drying and bonding.
- Native OxideThe thin, uncontrolled silicon dioxide layer, about 1-2 nm thick, that grows on silicon exposed to air or water and must be removed before many process steps.
- Particle Size DistributionA description of how much of a particle population falls in each size range, usually summarised by D10, D50 and D90.
- Planarisation (Planarization)The collective term for processes that remove steps on the wafer surface so that the next layers can be patterned and stacked.
- Platen (CMP)The rotating table in a CMP tool that carries the polishing pad and often houses endpoint sensors.
- Polishing Pad (CMP Pad)The porous polymer consumable on the CMP platen that carries slurry to the wafer and transmits polishing pressure; its hardness trades planarisation against uniformity.
- Removal Rate (Preston Equation)The thickness of film removed per unit time in CMP, described to first order by the Preston equation as proportional to pressure times velocity.
- Resist StripThe step that removes photoresist after it has served as a mask for etching or ion implantation, using plasma ashing and wet chemicals.
- Retainer Ring (CMP)A ring on the CMP polishing head that surrounds the wafer, keeps it in place and presses the pad to even out pressure at the wafer edge.
- SC1 Cleaning (APM)A wet clean using ammonium hydroxide, hydrogen peroxide and water to remove particles and organic contamination from wafers.
- Spin Rinse Dryer (SRD)Equipment that rinses wafers with ultrapure water while spinning them, then spins faster to throw off the water and dry them.
- Stop Layer (Polish Stop)A hard-to-polish film placed under the layer being removed so that CMP effectively stops when it is exposed.
- Supercritical Drying (Supercritical CO₂)Drying wafers by passing the liquid through the supercritical state, usually with carbon dioxide, so that no surface tension acts on fine patterns.
- Surface TensionThe force by which a liquid minimises its surface area; in wafer drying it drives the capillary forces that collapse fine patterns.
- Zeta PotentialA measure of the surface charge of particles in a liquid, which governs slurry dispersion stability and particle removal in cleaning.
Related pages
Glossary
CMP and cleaning terms
- Abrasive
- Aerosol Cleaning (Cryogenic Aerosol)
- BHF (Buffered Hydrofluoric Acid)
- Buff Polishing
- Ceria Slurry
- CMP (Chemical Mechanical Polishing)
- CMP Equipment (Polisher)
- CMP Slurry
- Colloidal Silica
- Copper Recess (for Hybrid Bonding)
- Cross Contamination
- Dishing (CMP)
- Fixed Abrasive Polishing
- Fumed Silica
- Functional Water
- Glazing (Pad and Wheel)
- Hydrophilicity and Hydrophobicity
- Native Oxide
- Particle Size Distribution
- Planarisation (Planarization)
- Platen (CMP)
- Polishing Pad (CMP Pad)
- Removal Rate (Preston Equation)
- Resist Strip
- Retainer Ring (CMP)
- SC1 Cleaning (APM)
- Spin Rinse Dryer (SRD)
- Stop Layer (Polish Stop)
- Supercritical Drying (Supercritical CO₂)
- Surface Tension
- Zeta Potential
Last updated: November 1, 2026