SMIF Pod
A SMIF pod is a sealed container for storing and moving wafers or photomasks in a fab without exposing them to room air. SMIF stands for Standard Mechanical Interface, a concept developed at Hewlett-Packard in the 1980s: keep only the inside of the container and the tool clean, instead of the whole room.
Also called: SMIF, Standard Mechanical Interface pod, wafer pod, reticle pod
Diagram
How a SMIF pod works
A wafer SMIF pod holds an open cassette of wafers and opens at the bottom. When it is placed on a tool's SMIF port, the base plate and the cassette are lowered together into the tool's clean enclosure, so the wafers move from pod to tool without meeting room air. SMIF pods are used mainly for 200 mm and smaller wafers.
By limiting the ultra-clean space to the pod and the tool interior, SMIF allowed fabs to run the general cleanroom at a less strict class, cutting construction and running costs. This is the origin of the mini-environment approach used in all modern fabs.
From SMIF to FOUP, and mask pods
For 300 mm wafers the industry adopted the FOUP, which opens at the front and holds wafers directly in its slots. FOUPs are opened by load ports, and wafers are shipped between companies in FOSBs. SEMI standards define the dimensions and doors of all these carriers.
Photomasks also travel in pods. Reticle SMIF pods protect masks on their way to exposure tools. EUV masks are often used without a pellicle, so even small particles can print as defects, and they are carried in dual pods with an inner and an outer container. Pod materials are chosen for low outgassing and static dissipation.
Japanese companies involved
- Shin-Etsu Polymer makes wafer carriers and reticle pods.
- Miraial makes FOUPs, FOSBs and other wafer containers.
- Shin-Etsu Polymer · FOUPs, FOSBs and reticle pods
- Miraial · FOUPs, FOSBs and wafer containers
FAQ
What is the difference between a SMIF pod and a FOUP?
A SMIF pod, mainly for 200 mm and smaller wafers, opens at the bottom and lowers a whole cassette into the tool. A FOUP, for 300 mm wafers, opens at the front, and a robot takes wafers out one at a time. Both protect wafers by keeping the container interior clean.
Are SMIF pods still used?
Yes. Many 200 mm fabs, which produce power devices, sensors, analogue and mature logic chips, still use SMIF pods. Reticle SMIF pods are also widely used for photomasks.
Related pages
Sources
Last updated: November 1, 2026