Small Outline Package (SOP)
A small outline package (SOP) is a surface-mount semiconductor package with leads coming out of two opposite sides of a rectangular plastic body. The leads are bent down in a gull-wing shape and soldered to pads on the surface of a printed circuit board. It is a surface-mount successor to the through-hole DIP.
Also called: SOIC, TSOP, SSOP, TSSOP, SOJ
Diagram
The SOP family
Many variants differ in thickness and lead pitch. The thin small outline package (TSOP), about 1 mm thick, became a standard for memory. The shrink SOP (SSOP) and thin shrink SOP (TSSOP) narrow the lead pitch so more pins fit along the same body.
The small outline J-lead package (SOJ) bends its leads back under the body in a J shape, which saves board area; it was once the standard DRAM package. Related four-sided packages are the PLCC, with J leads, and the QFP, with gull-wing leads, both used where more pins are needed.
Strengths and limits
SOPs are built on inexpensive leadframes, and because the solder joints sit on visible leads they are easy to inspect by eye or camera. That keeps them popular for analogue ICs, power-management ICs and automotive and industrial parts with modest pin counts.
Leads can only come out of the edges, so the pin count is limited. The length of the leads adds parasitic inductance, and heat removal is modest. Products that need many pins, high speed or strong heat dissipation have moved to QFN, BGA and chip-scale packages. In assembly, lead coplanarity, how evenly the lead tips sit in one plane, is a key control item to prevent open solder joints.
Japanese companies involved
- Shinko Electric Industries manufactures leadframes, the metal frames on which SOP-type packages are assembled.
- Toshiba Electronic Devices & Storage offers many of its discrete and power devices in SOP-family packages.
- Toshiba Electronic Devices & Storage · Power MOSFETs, IGBTs and discrete semiconductors
- Shinko Electric Industries · FC-BGA package substrates and lead frames
FAQ
What is the difference between SOP and SOIC?
They describe the same kind of package. SOIC (small outline integrated circuit) is the name common in JEDEC and US usage, while SOP is widely used in Japan and in EIAJ/JEITA outlines. Body widths and pitches differ slightly between the standards, so footprints should be checked against the datasheet.
Why did DRAM move away from SOJ and TSOP?
Higher speeds and capacities needed more connections, shorter electrical paths and better signal integrity than edge leads could provide. Ball grid array packages place connections across the whole underside, so memory moved to FBGA.
Related pages
Sources
Last updated: November 1, 2026