Semiconductor Packaging Terms: Advanced Packaging Explained
How dies are cut, connected and protected, and how advanced packaging joins several chips into one: dicing, wire and flip-chip bonding, substrates, 2.5D/3D integration and hybrid bonding.
From die to package
After wafer test the wafer is thinned, diced into individual dies and mounted in a package that protects the chip and connects it to the circuit board. Wire bonding and flip-chip bumps are the two main ways to connect the die, and molding compounds and substrates complete the package.
Advanced packaging now does much of the work that scaling used to do. Interposers, fan-out, chiplets, through-silicon vias and hybrid bonding place memory and logic dies side by side or on top of each other, which is how HBM and AI processors are built.
Japan's role
Japanese companies are strong across the back-end: DISCO in dicing and grinding, TOWA in molding, Shinkawa and others in bonding, and Ibiden, Shinko Electric, Ajinomoto and Resonac in substrates and packaging materials.
All packaging terms (57)
- Advanced PackagingPackaging technologies that connect several dies densely in one package, such as 2.5D interposers, 3D stacking, fan-out and hybrid bonding.
- Air VentA very shallow groove in an encapsulation mould that lets air and gas escape from the cavity while holding back the resin.
- Anisotropic Conductive Film (ACF)An adhesive film with conductive particles that conducts only through its thickness, used to connect display driver ICs and flexible circuits.
- Backgrinder (Back Grinding Equipment)Equipment that grinds the back side of a finished wafer with diamond wheels to thin it before dicing and packaging.
- BGA (Ball Grid Array)A package that uses a grid of solder balls on its underside as terminals, giving many connections in a small footprint.
- Bonding WireFine metal wire, typically 15-50 µm in diameter, that connects a chip's pads to the leadframe or substrate in wire bonding.
- CavityA hollow or recess: either a package that houses the chip in an open space, or the product-shaped recess in an encapsulation mould.
- ChipletA small die that implements part of a system and is combined with other dies in one advanced package, instead of building a single large monolithic chip.
- Coefficient of Thermal Expansion (CTE)How much a material's length grows per degree of temperature rise, usually in ppm/K; mismatches between package materials drive many failures.
- CoplanarityA measure of how evenly the lead tips or solder ball bottoms of a package sit in one plane; poor coplanarity causes open solder joints.
- Copper Clad Laminate (CCL)A board of resin-impregnated glass cloth with copper foil bonded to one or both sides; the starting material for PCBs and package substrates.
- CoWoS (Chip on Wafer on Substrate)TSMC's 2.5D packaging technology that places logic dies and HBM stacks side by side on an interposer; the standard package for AI accelerators.
- CSP (Chip Scale Package)A package no more than about 1.2 times the size of the die it contains, used to save board area in phones and wearables.
- CuringHardening a liquid or paste resin by heat or UV light so its molecules cross-link; used for mould compounds, underfills, adhesives and polyimide.
- Die Attach Film (DAF)A thin adhesive film laminated to the back of a wafer so that each diced die carries its own uniform layer of die attach material.
- Die Bonding (Die Attach)The assembly step that picks each diced chip and fixes it to a lead frame, substrate or wafer with adhesive, solder or a metal bond.
- Epoxy Molding Compound (EMC)The epoxy-based material that encapsulates chips in most packages, protecting them from moisture, contamination, light and mechanical damage.
- Flexural StrengthThe bending stress a material withstands before breaking; in semiconductors, the resistance of a chip to cracking, measured in MPa.
- Flip ChipA way of mounting a chip face down so that bumps on its surface connect directly to the substrate, instead of using bond wires.
- FR-4A flame-retardant laminate grade of glass-fibre cloth and epoxy resin; the standard base material for printed circuit boards.
- HBM (High Bandwidth Memory)A memory made by stacking DRAM dies with through-silicon vias, giving a very wide interface placed next to a GPU or other processor.
- Hybrid BondingA bumpless bonding method that joins copper pads and the surrounding oxide of two dies or wafers at the same time, allowing very fine pitch.
- Kirkendall VoidA tiny cavity that forms at the interface of two metals when their atoms diffuse at different rates, weakening wire bonds and solder joints.
- Lead FrameA thin patterned metal sheet that holds the die and provides the leads or pads of packages such as QFP, QFN and SOP.
- Lead On Chip (LOC)A leadframe package structure in which the leads run over the chip surface and are bonded to it with insulating tape, with no die pad.
- Molding EquipmentBack-end machines that encapsulate chips in epoxy molding compound, using either transfer molding or compression molding.
- Multi-Chip Module (MCM)Several semiconductor chips mounted side by side on one substrate and wired together so they can be handled as a single component.
- Package SubstrateThe multilayer wiring board between a chip and the circuit board, spreading the chip's fine-pitch terminals out to coarser solder balls.
- Package WarpageBowing of a semiconductor package caused by unequal thermal expansion of chip, resin and substrate, which can cause defects during reflow.
- Packaging EquipmentThe machines used in the back end of chip making to cut, mount, connect, encapsulate and mark dies so they can be used on a circuit board.
- Panel-Level Packaging (PLP)Packaging chips on large rectangular panels instead of round 300 mm wafers, to process more packages at once and waste less area.
- PottingEncapsulation by pouring liquid resin into a case or frame and curing it to cover and protect the chips and components inside.
- Printed Circuit Board (PCB)An insulating board with copper wiring that carries and connects packages and other components; the base of almost all electronic equipment.
- QFN (Quad Flat No-lead) PackageA small lead-frame package with terminal pads on its underside instead of protruding leads, often with an exposed thermal pad for heat removal.
- Reflow SolderingSoldering many joints at once by heating pre-applied solder paste, balls or bumps in an oven along a controlled temperature profile.
- Scribe LineThe narrow strip between chips on a wafer that is cut away in dicing, also used for alignment marks and test structures.
- Silver SinteringA die attach method that sinters fine silver particles under heat and pressure into a dense silver joint, used in SiC and IGBT power modules.
- Small Outline Package (SOP)A surface-mount package with gull-wing leads on two opposite sides of a rectangular plastic body, plus thin, fine-pitch and J-lead variants.
- Solder BallA small sphere of solder attached in a grid to the underside of a BGA or CSP package, forming the terminals that join it to the circuit board.
- Solder FluxA material that removes oxide from metal surfaces during soldering so that molten solder wets them and forms a reliable joint.
- Solder ResistAn insulating coating over a board's copper, opened only at the pads to be soldered so that solder does not spread to other wiring.
- StandoffThe gap between a package's underside and the circuit board, in practice the height of the solder joints, which strongly affects fatigue life.
- Stealth DicingA laser dicing method that forms a modified layer inside the wafer and then splits it by stretching the tape, with almost no kerf or debris.
- Surface Mount Technology (SMT)The assembly method that places components directly on pads on the board surface and solders them by reflow; standard in modern electronics.
- Temporary Bonding and Debonding (TBDB)Bonding a device wafer temporarily to a carrier so it can be thinned and processed, then releasing it; key for TSV, HBM and thin power devices.
- Thermal Interface Material (TIM)A material placed between a chip, heat spreader and heat sink to fill microscopic gaps and give heat a path out of the package.
- Thermal ViaA copper-plated hole in a board placed to carry heat from a hot component to inner copper planes or the back side, not to carry signals.
- Through HoleA hole drilled through a board and plated with copper to connect layers; also the assembly method of inserting component leads into holes.
- Through-Silicon Via (TSV)A copper-filled hole that passes vertically through a silicon die or wafer, connecting stacked dies over the shortest possible distance; the key interconnect of HBM and 3D ICs.
- UnderfillA resin that fills the gap between a flip-chip die and its substrate to spread thermal stress and protect the solder bumps.
- Void (Packaging Defect)An unintended gas-filled cavity inside a package, for example in mold compound, solder, underfill or die attach, that harms heat flow and reliability.
- Wafer BondingJoining two wafers, or dies to a wafer, with precise alignment; used to make SOI wafers, MEMS, stacked image sensors and 3D ICs.
- Wafer ThinningReducing the thickness of a finished wafer by grinding and polishing its back side, from about 775 µm down to tens of micrometres for thin packages and die stacking.
- Wedge BondingA wire bonding method that presses the wire sideways onto a pad with a wedge tool and joins it ultrasonically, without forming a ball.
- Wire BonderBack-end equipment that connects chip pads to a lead frame or substrate with fine gold, copper or aluminium wires.
- Wire BondingConnecting a chip's pads to the package leads or substrate with fine metal wires; still the most common chip interconnection method.
- Wire SweepDeformation of bond wires pushed by flowing resin during molding, which can short neighbouring wires; controlled by resin, process and mold design.
Packaging comparisons
Related pages
Glossary
Packaging terms
- Advanced Packaging
- Air Vent
- Anisotropic Conductive Film (ACF)
- Backgrinder (Back Grinding Equipment)
- BGA (Ball Grid Array)
- Bonding Wire
- Cavity
- Chiplet
- Coefficient of Thermal Expansion (CTE)
- Coplanarity
- Copper Clad Laminate (CCL)
- CoWoS (Chip on Wafer on Substrate)
- CSP (Chip Scale Package)
- Curing
- Die Attach Film (DAF)
- Die Bonding (Die Attach)
- Epoxy Molding Compound (EMC)
- Flexural Strength
- Flip Chip
- FR-4
- HBM (High Bandwidth Memory)
- Hybrid Bonding
- Kirkendall Void
- Lead Frame
- Lead On Chip (LOC)
- Molding Equipment
- Multi-Chip Module (MCM)
- Package Substrate
- Package Warpage
- Packaging Equipment
- Panel-Level Packaging (PLP)
- Potting
- Printed Circuit Board (PCB)
- QFN (Quad Flat No-lead) Package
- Reflow Soldering
- Scribe Line
- Silver Sintering
- Small Outline Package (SOP)
- Solder Ball
- Solder Flux
- Solder Resist
- Standoff
- Stealth Dicing
- Surface Mount Technology (SMT)
- Temporary Bonding and Debonding (TBDB)
- Thermal Interface Material (TIM)
- Thermal Via
- Through Hole
- Through-Silicon Via (TSV)
- Underfill
- Void (Packaging Defect)
- Wafer Bonding
- Wafer Thinning
- Wedge Bonding
- Wire Bonder
- Wire Bonding
- Wire Sweep
- CoWoS vs SoIC: what is the difference?
- CoWoS vs InFO: what is the difference?
- Chiplet vs monolithic: what is the difference?
- Hybrid bonding vs flip chip: what is the difference?
- TSV vs wire bond: what is the difference?
Last updated: November 1, 2026