FAiRS series
FUJIFILM's photoresist series for ArF (193 nm) immersion lithography. It supports both positive-tone and negative-tone imaging.
| Material type | ArF immersion photoresist |
|---|---|
| Exposure wavelength | 193 nm |
| Key feature | Positive tone / negative tone |
Materials
Photoresists are light-sensitive polymers coated on the wafer before exposure. Light passing through the photomask changes the solubility of the exposed areas, and the developer then removes either the exposed or unexposed parts to leave the pattern.
Resists are matched to the exposure light source, such as g-line, i-line, KrF, ArF, ArF immersion and EUV. Shorter wavelengths need resists with higher resolution and lower line edge roughness.
Tick "Add to bulk request" on the cards to send your request only to the companies and products you choose.
AdBanner space for Photoresists is available (one company per category).About advertising →
FUJIFILM's photoresist series for ArF (193 nm) immersion lithography. It supports both positive-tone and negative-tone imaging.
| Material type | ArF immersion photoresist |
|---|---|
| Exposure wavelength | 193 nm |
| Key feature | Positive tone / negative tone |
| Material type | ArF dry photoresist |
|---|---|
| Exposure wavelength | 193 nm |
FUJIFILM's photoresist series for KrF (248 nm) lithography. It consists of sub-series for implant, contact hole and line-and-space applications.
| Material type | KrF photoresist |
|---|---|
| Exposure wavelength | 248 nm |
| Series | GKR-46xx/32xx (implant), GKR-53xx (C/H), GKR-63xx (L/S) |
JSR's photoresists for ArF immersion lithography. They offer low LWR, low defectivity, and low MEEF, and some grades need no topcoat.
| Exposure wavelength | 193 nm (ArF immersion) |
|---|---|
| Key features | Low LWR, low defectivity, low MEEF |
| Grades | Non-topcoat type; type for use with bilayer hard mask (Dual HM) |
| Main applications | Fine patterning by ArF immersion lithography |
Shin-Etsu Chemical's photoresists. They cover light sources from i-line to KrF, ArF, and EUV, and Shin-Etsu also supplies spin-on middle layer and underlayer materials.
| Light sources | i-line, KrF, ArF, EUV |
|---|---|
| Series | SIPR/SEPR/SAIL/SEVR/SHB/ODL |
| Related materials | Spin-on middle layer and underlayer materials |
| Main applications | Lithography in semiconductor manufacturing, magnetic head manufacturing |
A positive photoresist from TOK (Tokyo Ohka Kogyo) for g-line (436 nm). OFPR-800, combined with the NMD-3 (2.38%) developer, became widely used.
| Exposure wavelength | 436 nm (g-line) |
|---|---|
| Resist type | Positive |
| Resolution guide | Target dimensions down to 0.7 µm, depending on grade |
| Developer | NMD-3 2.38% (TMAH) |
| Main grades | OFPR-800 / OFPR-5000 (high sensitivity) / OFPR-8600 (high heat resistance) |
* Specifications are reference values based on public information. Please confirm exact specifications with the maker.
More companies: Japanese Semiconductor Process Materials Suppliers · Japanese Wafer, Substrate and Photomask Suppliers
4 products listed
4 products listed
5 products listed
3 products listed
3 products listed
3 products listed
4 products listed
4 products listed
3 products listed
6 products listed
3 products listed
3 products listed
PFAS Regulation · Spin Coating · HSQ (Hydrogen Silsesquioxane) · Chemically Amplified Resist (CAR) · Post-Exposure Bake (PEB) · Metal Oxide Resist (MOR)
Last updated: November 7, 2026