Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Glossary · Etching

Plasma Density

Plasma density is the number density of electrons, or of ions, in a plasma, usually expressed as electrons per cubic centimetre (electron density). Because a plasma is electrically neutral overall, electron and positive ion densities are nearly equal. Together with electron temperature, plasma density largely determines the rate and uniformity of etching and deposition.

Also called: electron density, ion density, high-density plasma

Diagram


Typical electron densities of CCP, ICP, and ECR and helicon plasmas on a log axis

Click anywhere to zoom in there. Scroll to zoom, drag to move

Values are typical and vary with power, pressure and gas.

Typical values by plasma source


Density varies widely with the type of source. Capacitively coupled plasma (CCP), which discharges between two parallel electrodes, typically reaches about 10⁹–10¹⁰ cm⁻³. Inductively coupled plasma (ICP), which uses a coil, and microwave electron cyclotron resonance (ECR) plasma reach about 10¹¹–10¹² cm⁻³ and are called high-density plasmas.

Even so, only a small fraction of the gas is ionised. The rest remains neutral molecules and radicals, which outnumber the ions by orders of magnitude.

Why density matters and how it is measured


Higher density means more ions and radicals reach the wafer, so etch rates rise. A key strength of ICP is that density is set by the coil power while the energy of ions striking the wafer is set by a separate bias power on the wafer electrode.

Uniformity of density across the wafer matters as much as its average, since it translates directly into uniformity of etch rate and critical dimensions. Plasma density is measured with Langmuir probes, microwave interferometers and resonance probes, and is estimated indirectly through optical emission spectroscopy.

Japanese companies involved


  • Tokyo Electron (TEL) and Hitachi High-Tech make etch systems built on high-density plasma sources, using inductive and microwave ECR methods respectively among their designs.

FAQ


What counts as a high-density plasma?

Usually a plasma with an electron density of about 10¹¹ cm⁻³ or more, such as ICP, ECR or helicon plasma. These sources reach high density at low pressure, so ions travel straight to the wafer and fine patterns can be etched quickly and anisotropically.

Is plasma density the same as gas density?

No. Gas density counts all molecules, while plasma density counts only charged particles. At a pressure of a few mTorr, the gas density is around 10¹⁴ cm⁻³, so even a high-density plasma ionises only a small share of the gas.

Comparisons


Related pages


Sources


  1. Hokkaido University engineering report: Rapid measurement of plasma with a Langmuir probe (no. 115) (Japanese, PDF)

More on this topic


Etching terms

Last updated: November 13, 2026