Chemically amplified resist vs metal oxide resist: what is the difference?
As EUV lithography pushes to smaller features, the resist has become one of the main limits on resolution, roughness and dose. Chemically amplified resists, refined over decades of DUV production, are being adapted for EUV, while metal oxide resists offer a different set of strengths. Both are being improved in parallel, and chipmakers choose layer by layer.
The short answer
The difference is the material and the reaction. A chemically amplified resist (CAR) is an organic polymer with a photoacid generator: light releases acid, which then catalyses many deprotection reactions during a post-exposure bake. A metal oxide resist (MOR) is built from small clusters of a metal oxide such as tin oxide, which absorb EUV light strongly and link together directly when exposed, without acid diffusion. CAR dominates DUV and much of EUV; MOR is gaining ground for the finest EUV and High-NA EUV layers.
Side-by-side comparison
| Aspect | Chemically amplified resist | Metal oxide resist |
|---|---|---|
| Main components | Organic polymer with acid-sensitive protecting groups, a photoacid generator (PAG) and a base quencher | Metal-oxygen clusters a few nanometres across, typically tin based, with organic ligands |
| Imaging mechanism | Light creates acid; during the post-exposure bake the acid catalyses a cascade of deprotection reactions | EUV exposure strips ligands and the clusters condense into an insoluble network |
| EUV absorption | Low, because carbon, hydrogen and oxygen absorb 13.5 nm light weakly | High, because tin absorbs EUV strongly |
| Main source of blur | Acid diffusion during the bake | No acid diffusion; blur comes mainly from secondary electrons |
| Etch resistance | Moderate; thicker films or hard masks needed | High, so thinner films can still transfer the pattern |
| Usual tone | Mostly positive tone (exposed areas dissolve); negative-tone development also used | Mostly negative tone (exposed areas remain) |
| Coating method | Spin coating from solution | Spin coating, or dry deposition from gas-phase precursors |
| Production track record | Decades in KrF, ArF, ArF immersion and EUV | Developed for EUV; being introduced on selected layers |
How chemical amplification works
In a chemically amplified resist, exposure decomposes the photoacid generator and releases a small amount of strong acid. During the post-exposure bake, each acid molecule moves through the polymer and removes many protecting groups in turn, making the exposed region soluble in an alkaline developer. Because one photon's worth of acid triggers many reactions, the resist needs far less light than earlier non-amplified resists.
The concept was developed at IBM in the early 1980s and became essential when KrF excimer lasers at 248 nm proved too weak for the novolac resists used with mercury-lamp lithography. It has remained the mainstream resist chemistry through ArF, ArF immersion and into EUV. Its weakness is that the acid diffuses during the bake, blurring the image; base quenchers limit this, but blur and line-edge roughness remain a trade-off against sensitivity.
Why EUV exposes the limits of organic resists
Each EUV photon carries about 92 eV, roughly 14 times the energy of an ArF photon, so a given dose delivers far fewer photons. Organic resists also absorb EUV weakly, so only a fraction of those photons react in the film. Random variation in the number of absorbed photons and acid molecules per feature, known as stochastic effects, shows up as roughness and occasional missing or bridged features. Raising the dose helps, but it lowers scanner throughput.
Strengths and open questions for metal oxide resists
Tin-based clusters absorb EUV several times more strongly than organic material, so a thin film still uses the light efficiently. With no acid diffusion, the image blur is lower, and the high etch resistance allows thin films that are less prone to pattern collapse. These properties matter even more for High-NA EUV, whose shallow depth of focus calls for thinner resist.
The open questions are practical: keeping metal contamination out of other tools and wafers, reducing defects, and building a production track record. Developers offer both spin-on MOR and dry resist that is deposited and developed in vacuum chambers.
Where Japanese suppliers fit
Japanese companies supply a large part of the world's photoresist, including JSR, Tokyo Ohka Kogyo, Shin-Etsu Chemical, Sumitomo Chemical and Fujifilm. JSR acquired Inpria, a US developer of spin-on metal oxide resist, in 2021, so Japanese firms are active in both resist families.
FAQ
Will metal oxide resists replace chemically amplified resists?
Not across the board in the near term. CARs keep improving through new PAGs, polymers and quenchers, and they have decades of production experience. Metal oxide resists are more likely to be adopted for the finest EUV and High-NA EUV layers, with each chipmaker choosing per layer.
Why are most metal oxide resists negative tone?
Exposure removes the organic ligands surrounding the metal oxide clusters, and the clusters bond together into a network that the developer cannot dissolve. Exposed areas therefore remain after development. Negative tone can be an advantage for patterns such as small holes or line ends, depending on the mask design.
What is the role of the post-exposure bake?
For a chemically amplified resist, the post-exposure bake supplies the heat that lets the acid move and catalyse deprotection. Its temperature and time control sensitivity and blur, so it is tightly controlled on the coater-developer. Metal oxide resists also use bakes, but they do not rely on acid catalysis.
Do resists raise PFAS concerns?
Many photoacid generators used in chemically amplified resists are fluorinated compounds, which links resists to restrictions under discussion for PFAS chemicals. Resist makers and research centres are developing PFAS-free alternatives, and metal oxide resists are among the options being considered.
Terms compared
- Chemically Amplified Resist (CAR)A photoresist in which light releases acid from a photoacid generator and the acid catalyses many resin reactions, giving high sensitivity.
- Metal Oxide Resist (MOR)An EUV photoresist based on small metal oxide clusters, such as tin oxide, that absorbs EUV strongly and resists etching even as a thin film.
- Stochastic Effects (EUV)Random variation in printed patterns caused by small photon counts and molecular randomness in the resist, a major limit for EUV.
Japanese companies involved
- JSR · Photoresists and semiconductor materials
- Tokyo Ohka Kogyo (TOK) · Photoresists and high-purity process chemicals
- Shin-Etsu Chemical · Silicon wafers, photoresists and photomask blanks
- Sumitomo Chemical · Photoresists and semiconductor process chemicals
More lithography comparisons
Sources
- The Society of Synthetic Organic Chemistry, Japan: Chemically amplified resists (Japanese) (PDF)
- The Society of Photopolymer Science and Technology: EUV Metal Oxide Resist Development Technology for Improved Sensitivity, Roughness and Pattern Collapse Margin for High Volume Manufacturing
- imec: Removing PFAS from semiconductor manufacturing, from resists to rinses
- imec: EUV lithography, weighing the options for future logic and memory applications
Semiconductor comparisons
Last updated: November 2, 2026