Lithography Terms: EUV, Photoresist and Patterning Explained
The steps that print circuit patterns onto the wafer: photomasks, photoresist, exposure tools from i-line to EUV, and the multi-patterning and overlay techniques that push resolution further.
How patterning works
Lithography transfers a pattern from a photomask to a light-sensitive resist on the wafer. A coater/developer applies and bakes the resist, the scanner exposes it, and the developer dissolves the exposed (or unexposed) areas. The remaining resist protects the wafer during the next etch or implant.
Resolution depends on wavelength, numerical aperture and process tricks such as immersion, phase-shift masks, optical proximity correction and multiple patterning. EUV at 13.5 nm is now used for the most critical layers of leading-edge logic and DRAM.
Japan's role
Japanese companies supply most of the resist, coater/developer tracks and mask blanks used worldwide, as well as mask inspection systems. Tokyo Electron, JSR, Tokyo Ohka Kogyo, Shin-Etsu Chemical, HOYA, Lasertec, Canon and Nikon appear throughout this section.
All lithography terms (39)
- Bottom Anti-Reflective Coating (BARC)A thin film under the photoresist that suppresses light reflected from the substrate, keeping printed line widths stable.
- Chemically Amplified Resist (CAR)A photoresist in which light releases acid from a photoacid generator and the acid catalyses many resin reactions, giving high sensitivity.
- Coater/developerThe tool that coats wafers with photoresist, bakes them and develops the pattern, working inline with the lithography scanner.
- Coulomb EffectMutual repulsion between electrons in a beam that blurs and shifts the image, worsening as current rises and limiting electron-beam writing speed.
- Directed Self-Assembly (DSA)Patterning that uses block copolymers' natural phase separation, guided by lithography, to form very fine periodic features.
- DUV (Deep Ultraviolet)Ultraviolet light of roughly 100-300 nm; in chipmaking, the 248 nm KrF and 193 nm ArF lasers used in most lithography steps.
- DUV Lithography EquipmentReduction projection exposure tools that use 248 nm KrF or 193 nm ArF excimer lasers; the workhorse of chip lithography.
- Edge Bead Removal (EBR)A step after spin coating that sprays solvent on the outer few millimetres of the wafer to remove the thick edge bead before it can shed particles.
- EUV (Extreme Ultraviolet)Light with a 13.5 nm wavelength used to print the finest chip patterns; it needs mirrors, vacuum and a tin-plasma light source.
- EUV Lithography Equipment (EUV Scanner)Exposure tools that print chip patterns with 13.5 nm extreme ultraviolet light, using a tin plasma source and mirror optics in vacuum.
- Excimer LaserA pulsed gas laser that emits ultraviolet light from short-lived rare-gas halide molecules; ArF and KrF versions power DUV lithography.
- Focus LevelingAn exposure tool function that measures wafer height and tilt and moves the stage so each exposed area stays within the lens's depth of focus.
- Hard MaskAn etch-resistant film, inorganic or carbon-based, that takes the resist pattern and protects the layer below during deep etching.
- High-NA EUV LithographyNext-generation EUV lithography that raises the numerical aperture from 0.33 to 0.55 to print finer patterns in a single exposure.
- HMDS (Hexamethyldisilazane)An organosilicon adhesion promoter applied as a vapour before resist coating, making the wafer surface hydrophobic so the resist does not lift off.
- HSQ (Hydrogen Silsesquioxane)An inorganic negative-tone electron-beam resist made of silicon, oxygen and hydrogen that can print lines below 10 nm and becomes oxide-like after exposure.
- Immersion Lithography (ArFi)ArF lithography with ultrapure water between the lens and wafer, raising the numerical aperture above 1 to print finer patterns.
- Inverse Lithography Technology (ILT)A computational method that works backward from the desired wafer pattern to find the mask shape that prints it best, often yielding curvilinear masks.
- Lift-offA patterning method that deposits a film over a resist pattern and then dissolves the resist, removing the film on top and leaving it only where the substrate was bare.
- Line Edge Roughness (LER)Nanometre-scale jaggedness along the edges of printed lines; its effect grows as line widths shrink.
- Lithography EquipmentThe tools that project a photomask's circuit pattern onto photoresist on a wafer; their resolution sets the smallest features a fab can make.
- Metal Oxide Resist (MOR)An EUV photoresist based on small metal oxide clusters, such as tin oxide, that absorbs EUV strongly and resists etching even as a thin film.
- Multi-PatterningForming patterns finer than one exposure can resolve by repeating lithography, deposition and etch steps; it carried ArF immersion lithography down to the 10 and 7 nm nodes.
- NA (Numerical Aperture)A dimensionless measure of the range of angles a lens collects light over; higher NA lets lithography print finer patterns.
- Nano-Imprint Lithography (NIL)Patterning by pressing a template carrying nanoscale features into liquid resist and curing it, without projection optics.
- Novolac ResinAn acid-catalysed phenolic resin that forms the base of g-line and i-line positive resists and serves as an epoxy hardener in package mold compounds.
- Oblique IlluminationIllumination that strikes at an angle; used as off-axis illumination in lithography to raise resolution and as dark-field lighting in defect inspection.
- Photomask / ReticleThe quartz master plate carrying a chip layer's pattern in an opaque film, which the exposure tool projects onto the wafer.
- PhotoresistA light-sensitive material whose solubility in developer changes on exposure, used to carry the circuit pattern onto the wafer.
- Post-Exposure Bake (PEB)A hot-plate bake after exposure and before development that drives the acid reaction in chemically amplified resists and helps set linewidth.
- Rayleigh EquationThe formulas R = k₁λ/NA and DOF = k₂λ/NA² that relate lithography resolution and depth of focus to wavelength and NA.
- RegistrationThe accuracy with which a written pattern sits at its designed position, especially on a photomask; an absolute error, unlike layer-to-layer overlay.
- Reticle / PhotomaskThe mask used in reduction projection lithography: a pattern four times larger than on the wafer, one reticle per layer.
- Spin CoatingA method that dispenses liquid onto a spinning wafer so centrifugal force spreads it into a thin, uniform film; the standard way to apply photoresist.
- Step-and-Repeat / Step-and-ScanExposure methods that print a mask pattern field by field across a wafer: steppers expose each field at once, scanners sweep a slit across it.
- StepperA reduction projection exposure tool that exposes one field at a time and steps the wafer to repeat the exposure across it.
- Stochastic Effects (EUV)Random variation in printed patterns caused by small photon counts and molecular randomness in the resist, a major limit for EUV.
- SwellingThe volume increase of a polymer that absorbs a solvent or water without dissolving, historically a key limit on negative photoresist resolution.
- TMAH (Tetramethylammonium Hydroxide)A metal-free strong organic base, (CH₃)₄NOH, used at 2.38 wt% as the standard photoresist developer and also for anisotropic silicon etching.
Lithography comparisons
Related pages
Glossary
Lithography terms
- Bottom Anti-Reflective Coating (BARC)
- Chemically Amplified Resist (CAR)
- Coater/developer
- Coulomb Effect
- Directed Self-Assembly (DSA)
- DUV (Deep Ultraviolet)
- DUV Lithography Equipment
- Edge Bead Removal (EBR)
- EUV (Extreme Ultraviolet)
- EUV Lithography Equipment (EUV Scanner)
- Excimer Laser
- Focus Leveling
- Hard Mask
- High-NA EUV Lithography
- HMDS (Hexamethyldisilazane)
- HSQ (Hydrogen Silsesquioxane)
- Immersion Lithography (ArFi)
- Inverse Lithography Technology (ILT)
- Lift-off
- Line Edge Roughness (LER)
- Lithography Equipment
- Metal Oxide Resist (MOR)
- Multi-Patterning
- NA (Numerical Aperture)
- Nano-Imprint Lithography (NIL)
- Novolac Resin
- Oblique Illumination
- Photomask / Reticle
- Photoresist
- Post-Exposure Bake (PEB)
- Rayleigh Equation
- Registration
- Reticle / Photomask
- Spin Coating
- Step-and-Repeat / Step-and-Scan
- Stepper
- Stochastic Effects (EUV)
- Swelling
- TMAH (Tetramethylammonium Hydroxide)
- EUV vs DUV lithography: what is the difference?
- High-NA EUV vs standard EUV: what is the difference?
- Single patterning vs multi-patterning: what is the difference?
- Chemically amplified resist vs metal oxide resist: what is the difference?
Last updated: November 1, 2026