Stocker (Automated Wafer Storage)
A stocker is an automated storage system that holds FOUPs of work-in-process wafers inside a fab. Front-end processing takes hundreds to over a thousand steps over two to three months, so many lots are always waiting between steps; stockers keep them clean and hand them to overhead transport when tools are ready.
Also called: FOUP stocker, purge stocker
Diagram
Structure and role
A stocker has racks of shelves and a stacker crane that moves along and up the racks to store and retrieve FOUPs. Capacity ranges from hundreds to thousands of carriers. The AMHS controller manages every move and keeps the location of each FOUP in step with the MES.
Stockers are placed in front of and behind bottleneck tools and at the borders of process areas. They act as buffers: when upstream tools produce faster than downstream tools can take wafers, or vice versa, the stocker absorbs the difference so that expensive tools do not stop for lack of work.
Protecting waiting wafers
Wafers waiting in a FOUP are still exposed to airborne molecular contamination (AMC), such as moisture, organics and ammonia. Purge stockers feed nitrogen into each FOUP on its shelf, which protects exposed resist, copper interconnect and other sensitive surfaces.
Some steps also have a queue-time (Q-time) limit, for example between cleaning and deposition. If a lot waits too long, it has to be recleaned or scrapped. The MES watches how long each lot has been in the stocker and releases lots close to their limit first.
Japanese companies involved
- Daifuku and Murata Machinery supply stockers together with overhead hoist transport as integrated automated material handling systems.
- Daifuku · Cleanroom automated material handling systems (AMHS)
- Murata Machinery (Muratec) · Stockers and fab automation
FAQ
Why do fabs need so much wafer storage?
Tools have different speeds and go down for maintenance at different times, and products follow long, re-entrant routes. Some waiting is unavoidable, and buffers keep the bottleneck tools supplied. Stockers keep this inventory clean, tracked and quick to retrieve.
What is the difference between a stocker and an under-track buffer?
A stocker is a large, enclosed storage unit with its own crane. Under-track or side-track buffers are small shelves along the OHT rail near tools, holding a few FOUPs close to where they are needed next. Fabs use both.
Related pages
- OHT (Overhead Hoist Transport)
- FOUP (Front Opening Unified Pod)
- Manufacturing Execution System (MES)
- Particle Contamination
- Native Oxide
- Work in Process (WIP)
- Stockers
- Automated material handling systems (AMHS)
- Daifuku Clean Stocker CLS-50
- Murata Machinery (Muratec) CDS350-M3 clean stocker
- Murata Machinery (Muratec) CDWX bare wafer stocker
- Murata Machinery (Muratec) HTC
Sources
Last updated: November 13, 2026