Exhibiting at SEMICON Japan 2026 (Dec 9–11)? We are now accepting advertising inquiries from exhibitors.Ads for SEMICON Japan 2026Learn more

Glossary · Power semiconductors

Body Diode

A body diode is the pn junction diode that inevitably forms inside a power MOSFET between the p-type body and the n-type drain. Because the body is tied to the source, it acts as a diode conducting from source to drain, in parallel with the transistor.

Also called: parasitic diode, intrinsic diode, built-in diode

Diagram


How to use the MOSFET body diode (parasitic diode) and what to watch for

Click anywhere to zoom in there. Scroll to zoom, drag to move

It cannot be removed, so the circuit design must handle it well.

Using the body diode


Inverters and motor-drive bridges need a freewheeling diode to carry inductor current at the moment a switch turns off. In a MOSFET the body diode can take this role, so no separate diode is required. An IGBT has no such body diode, which is why IGBT modules pair each IGBT chip with a freewheeling diode chip.

Body diodes have a relatively high forward voltage and conduction loss. To limit that loss, many circuits use synchronous rectification: during the freewheeling period the MOSFET itself is turned on, so the current flows through the low-resistance channel instead of the diode. The body diode then conducts only during the short dead time between the high-side and low-side switches.

Reverse recovery and SiC-specific issues


Being a pn diode, the body diode shows reverse recovery. In silicon super-junction MOSFETs the recovery charge is large, and in bridge circuits it can cause high loss or even destroy devices. Versions with lifetime control to speed up the body diode are made for these applications.

The body diode of a SiC MOSFET recovers quickly, but its forward voltage is high, around 3 V, because of SiC's wide bandgap. A further issue is bipolar degradation: when forward current flows for long periods, the energy released by electron-hole recombination can make basal plane dislocations in the crystal expand into stacking faults, increasing on-resistance and forward voltage. Remedies include epitaxial layers designed to convert or suppress these dislocations and MOSFETs with an embedded SiC Schottky diode that takes over the freewheeling current.

Japanese companies involved


  • ROHM and Toshiba Electronic Devices & Storage make silicon and SiC MOSFETs and publish design guidance on body-diode behaviour in bridge circuits.
  • Mitsubishi Electric has developed SiC MOSFETs with an embedded Schottky barrier diode to avoid body-diode conduction.

FAQ


Can the body diode be removed?

No. It is part of the vertical MOSFET structure, because the p-type body that forms the channel must be connected to the source. Designers can only reduce its use, for example by synchronous rectification, short dead time or an external Schottky diode in parallel.

Why is dead time important for the body diode?

In a bridge leg both switches are kept off for a short dead time to prevent shoot-through. During that time the load current flows through a body diode, causing conduction loss and later reverse recovery. Keeping dead time short reduces both.

Related pages


Sources


  1. Toshiba Electronic Devices & Storage e-learning: MOSFET body diode (Japanese)

More on this topic


Power semiconductors terms

Last updated: November 13, 2026